Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
Problems of calculating additional power loss in a frequency-controlled induction motor AIP 160S4 resulted from voltage higher harmonics are considered. Ways of the loss reduction through changing the rotor tooth zone are suggested.
Saved in:
| Date: | 2012 |
|---|---|
| Main Authors: | Petrenko, A. N., Tanyanskyi, V. Yu., Petrenko, N. Ya. |
| Format: | Article |
| Language: | Russian |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2012
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/2074-272X.2012.5.07 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
STUDY OF FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR UNITS TEMPERATURE VERSUS LOAD AND POWER SUPPLY TYPE
by: Vakaruk, T. V., et al.
Published: (2014)
by: Vakaruk, T. V., et al.
Published: (2014)
COMPONENTS OF THE TOTAL POWER LOSSES IN THREE-PHASE ENERGY SUPPLY SYSTEMS WITH SYMMETRIC SINUSOIDAL VOLTAGE SOURCE
by: Zhemerov, George G., et al.
Published: (2015)
by: Zhemerov, George G., et al.
Published: (2015)
Diagnosis of induction motors by using the influence of higher current harmonics
by: E. V. Demenchuk, et al.
Published: (2021)
by: E. V. Demenchuk, et al.
Published: (2021)
OBJECTIVE FUNCTIONS OF THE COMPARATIVE ANALYSIS OF THE ENERGY EFFICIENCY OF ELECTROMAGNETIC SYSTEMS OF INDUCTION MOTORS WITH INNER AND OUTER ROTORS
by: Stavinskii, A. A., et al.
Published: (2015)
by: Stavinskii, A. A., et al.
Published: (2015)
COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
by: Stavinskii, A. A., et al.
Published: (2015)
by: Stavinskii, A. A., et al.
Published: (2015)
Research of operating modes of conductors in power supply systems of cranes with induction feed, taking into account the influence of higher harmonics of the current
by: Andrienko, P. D., et al.
Published: (2021)
by: Andrienko, P. D., et al.
Published: (2021)
INVESTIGATION OF LOSSES IN INSULATION OF HIGH-VOLTAGE POWER CABLES WITH XLPE INSULATION
by: Shchebeniuk, L. A., et al.
Published: (2016)
by: Shchebeniuk, L. A., et al.
Published: (2016)
CALCULATION OF FIELDS AND CURRENTS IN THE INDUCTION SYSTEM WITH THE ATTRACTIVE SCREEN AND THE ADDITIONAL COIL AS A TOOL FOR THE STRAIGHTENING
by: Batygin, Yu. V., et al.
Published: (2015)
by: Batygin, Yu. V., et al.
Published: (2015)
Model of pulsating current traction motor taking into consideration magnetic losses in steel
by: Goolak, S., et al.
Published: (2021)
by: Goolak, S., et al.
Published: (2021)
A mathematical model of an induction motor with the stator and rotor unsymmetry
by: Chaban, V. Y., et al.
Published: (2012)
by: Chaban, V. Y., et al.
Published: (2012)
Additivity of elementary maps on alternative rings
by: Ferreira, Bruno
Published: (2019)
by: Ferreira, Bruno
Published: (2019)
DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
by: Vaskovskyi, Yu. M., et al.
Published: (2013)
by: Vaskovskyi, Yu. M., et al.
Published: (2013)
Refined calculation of energy modes of a frequency-regulated induction motor
by: Volkov, V. A., et al.
Published: (2024)
by: Volkov, V. A., et al.
Published: (2024)
Modified additive-averaged splitting for solving three-dimensional equations of hydrodynamics
by: Katsalova, L. N.
Published: (2016)
by: Katsalova, L. N.
Published: (2016)
ASSESSING THE FEASIBILITY OF USING AN ADDITIONAL ENERGY SOURCE TO ENSURE THE STABLE OPERATION OF A STIRLING ENGINE
by: Golovko , V., et al.
Published: (2025)
by: Golovko , V., et al.
Published: (2025)
Wavelet packet analysis for rotor bar breakage in an inverter induction motor
by: Abu Ibaid, O. Z. I., et al.
Published: (2023)
by: Abu Ibaid, O. Z. I., et al.
Published: (2023)
Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
by: Malyar, V. S., et al.
Published: (2022)
by: Malyar, V. S., et al.
Published: (2022)
APPLICATION OF A RELATIVE TECHNICAL LEVEL INDEX METHOD TO INDUCTION MOTOR OPTIMIZATION PROBLEMS
by: Stavinskii, A. A., et al.
Published: (2014)
by: Stavinskii, A. A., et al.
Published: (2014)
Method of calculation of electromagnetic torque and energy losses of three-phase induction motors when powered by a regulated single-phase voltage
by: Shurub, Yu. V., et al.
Published: (2022)
by: Shurub, Yu. V., et al.
Published: (2022)
Influence of doping additive on thermophysical and rheological properties of halogen-free polymer composition for cable insulation and sheaths
by: Zolotaryov, V. M., et al.
Published: (2022)
by: Zolotaryov, V. M., et al.
Published: (2022)
EXPERIMENTAL STUDY OF PROCESSES IN AN ATTRACTIVE-SCREEN INDUCTOR SYSTEM UNDER ADDITIONAL COIL INSERTION
by: Batygin, Yu. V., et al.
Published: (2014)
by: Batygin, Yu. V., et al.
Published: (2014)
A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
by: Malyar, V. S., et al.
Published: (2019)
by: Malyar, V. S., et al.
Published: (2019)
PHYSICAL MEANING OF THE «REACTIVE POWER» CONCEPT APPLIED TO THREE-PHASE ENERGY SUPPLY SYSTEMS WITH NON-LINEAR LOAD
by: Zhemerov, George G., et al.
Published: (2015)
by: Zhemerov, George G., et al.
Published: (2015)
Higher Space-Harmonics Magnetron
by: Gurko, A. A.
Published: (2013)
by: Gurko, A. A.
Published: (2013)
The study of convergence of additive-averaged splitting based on the scheme of explicit solution for three-dimensional equations of convective diffusion
by: Katsalova, L.
Published: (2015)
by: Katsalova, L.
Published: (2015)
Assembly methods of solving inverse problems as an integral element of additive technologies for interpretations of gravity anomalies
by: Balk, P. I., et al.
Published: (2019)
by: Balk, P. I., et al.
Published: (2019)
THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
by: Zagirnyak, M. V., et al.
Published: (2014)
by: Zagirnyak, M. V., et al.
Published: (2014)
MATHEMATICAL MODELLING OF TRANSIENTS IN THE ELECTRIC DRIVE OF THE SWITCH – THE MAIN EXECUTIVE ELEMENT OF RAILWAY AUTOMATION
by: Buriakovskyi, S. G., et al.
Published: (2020)
by: Buriakovskyi, S. G., et al.
Published: (2020)
DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
by: Ostashevskiy, N. A., et al.
Published: (2013)
by: Ostashevskiy, N. A., et al.
Published: (2013)
Variations of induction vector in North America
by: Babak, V., et al.
Published: (2014)
by: Babak, V., et al.
Published: (2014)
HIGH CURRENT HARMONICS INFLUENCE ON THE CHOICE OF CONDUCTORS OF CRANE POWER SUPPLY SYSTEMS
by: Andrienko, P. D., et al.
Published: (2019)
by: Andrienko, P. D., et al.
Published: (2019)
The experience of comparing the variations of the induction vector in magnetically conjugate points
by: Rokityansky, I., et al.
Published: (2017)
by: Rokityansky, I., et al.
Published: (2017)
The seasonal changes in the position of the upper boundary of the Black Sea hydrogen sulfide zone due to the nature of the dynamic processes development
by: Belevich, R.R., et al.
Published: (2022)
by: Belevich, R.R., et al.
Published: (2022)
Технологія контролю якості виробів адитивного виробництва в ході друку елементів енергетичних комплексів
by: Romanenko, Vladyslav
Published: (2024)
by: Romanenko, Vladyslav
Published: (2024)
ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
by: Petrushin, V. S., et al.
Published: (2012)
by: Petrushin, V. S., et al.
Published: (2012)
Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
by: Abed, K., et al.
Published: (2024)
by: Abed, K., et al.
Published: (2024)
Methodology for forecasting the number of disabled people from sanitary losses
by: Trofymchuk, Oleksandr, et al.
Published: (2025)
by: Trofymchuk, Oleksandr, et al.
Published: (2025)
Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
by: Milykh, V. I.
Published: (2023)
by: Milykh, V. I.
Published: (2023)
COMPONENTS OF TOTAL ELECTRIC ENERGY LOSSES POWER IN PQR SPATIAL COORDINATES
by: Zhemerov, George G., et al.
Published: (2016)
by: Zhemerov, George G., et al.
Published: (2016)
Ensuring standardized parameters for the transmission of digital signals by twisted pairs at the technological stage of manufacturing cables for industrial operating technologies
by: Bezprozvannych, G. V., et al.
Published: (2023)
by: Bezprozvannych, G. V., et al.
Published: (2023)
Similar Items
-
STUDY OF FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR UNITS TEMPERATURE VERSUS LOAD AND POWER SUPPLY TYPE
by: Vakaruk, T. V., et al.
Published: (2014) -
COMPONENTS OF THE TOTAL POWER LOSSES IN THREE-PHASE ENERGY SUPPLY SYSTEMS WITH SYMMETRIC SINUSOIDAL VOLTAGE SOURCE
by: Zhemerov, George G., et al.
Published: (2015) -
Diagnosis of induction motors by using the influence of higher current harmonics
by: E. V. Demenchuk, et al.
Published: (2021) -
OBJECTIVE FUNCTIONS OF THE COMPARATIVE ANALYSIS OF THE ENERGY EFFICIENCY OF ELECTROMAGNETIC SYSTEMS OF INDUCTION MOTORS WITH INNER AND OUTER ROTORS
by: Stavinskii, A. A., et al.
Published: (2015) -
COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
by: Stavinskii, A. A., et al.
Published: (2015)