Buchumschlag

INFLUENCE OF FERROMAGNETIC CORE PARAMETERS ON INDUCTION-TYPE DYNAMIC MOTOR EFFICIENCY

A mathematical model of a locked induction-type dynamic motor with a ferromagnetic core is developed. A performance criterion allowing for a set of the motor’s force and dimension indices is introduced. Mathematical modeling of the motor’s processes under various parameters of the ferromagnetic core...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	Bolyukh, V. F., Oleksenko, S. V., Schukin, I. S.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2012
Schlagworte:	induction-type dynamic motor mathematical model ferromagnetic core 621.313 536.2.24 539.2
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2012.6.04
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

EXPERIMENTAL STUDY OF FERROMAGNETIC CORE PARAMETERS INFLUENCE ON ELECTROMECHANICAL CHARACTERISTICS OF A LINEAR INDUCTION-DYNAMIC CONVERTER
von: Bolyukh, V. F., et al.
Veröffentlicht: (2014)

INVESTIGATION OF LINEAR PULSE ELECTROMECHANICAL CONVERTER OF INDUCTION TYPE WITH DOUBLE ARMATURE INTENDED FOR DESTROYING INFORMATION ON SSD STORAGE DEVICE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

INFLUENCE OF ARMATURE PARAMETERS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER ON ITS EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

EFFICIENCY OF LINEAR PULSE ELECTROMECHANICAL CONVERTERS DESIGNED TO CREATE IMPACT LOADS AND HIGH SPEEDS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

A COMPARATIVE ANALYSIS OF CONSTRUCTIVE SCHEMES OF LINEAR IMPACTOR ELECTROMECHANICAL CONVERTERS COMBINED TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2019)

EXCITATION WITH A SERIES OF PULSES OF A LINEAR PULSE ELECTRODYNAMIC TYPE CONVERTER OPERATING IN POWER AND HIGH-SPEED MODES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2020)

ELECTROMECHANICAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH A MOVABLE INDUCTOR AND TWO ARMATURES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

A TECHNIQUE OF EXPERIMENTAL INVESTIGATIONS OF LINEAR IMPULSE ELECTROMECHANICAL CONVERTERS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

HIGH-PERFORMANCE ELECTROMECHANICAL AND ELECTROMAGNETIC PULSE DEVICES FOR DESTRUCTION OF INFORMATION ON DIGITAL DRIVES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

AN OPTIMIZATION APPROACH TO THE CHOICE OF PARAMETERS OF LINEAR PULSE INDUCTION ELECTROMECHANICAL CONVERTER
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

INVESTIGATION OF THERMAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER OF CYCLIC ACTION
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

CALCULATION OF MAGNETIC FIELD OF THREE-PHASE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS COVERED BY FERROMAGNETIC CORES
von: Rozov, V. Yu., et al.
Veröffentlicht: (2017)

MAGNETIC CORE APPLICATION IN A PLANAR RESONATOR WITH A YTTRIUM IRON GARNET FILM FOR ENHANCING STRONG PHOTON-MAGNON COUPLING
von: Vakula, A. S., et al.
Veröffentlicht: (2024)

Total harmonic distortion analysis of inverter fed induction motor drive using neuro fuzzy type-1 and neuro fuzzy type-2 controllers
von: Srinivas, G., et al.
Veröffentlicht: (2024)

ANALYSIS OF THE OPERATION PECULIARITIES OF THE SUPERCONDUCTING INDUCTIVE CURRENT LIMITER WITH ADDITIONAL SUPERCONDUCTING SCREEN
von: Dan'ko, V. G., et al.
Veröffentlicht: (2017)

Biomagnetism of tumor in rats with Guerin’s carcinoma after injection of ferromagnetic nanocomposite (Ferroplat): contactless measurement
von: Todor, I.N., et al.
Veröffentlicht: (2023)

CONTROL CURRENT METHOD OF THE CONCENTRATION OF FERROMAGNETIC ELEMENTS IN THE WORKING CHAMBER OF THE TECHNOLOGICAL INDUCTOR OF MAGNETIC FIELD DURING ITS OPERATION
von: Milykh, V. I., et al.
Veröffentlicht: (2020)

CALCULATIONS OF ELECTROMAGNETIC FORCES ACTING ON A THIN FERROMAGNETIC PLATE DURING MAGNETIC-PULSE TREATMENT
von: Baida, E. I.
Veröffentlicht: (2014)

Maximum power point tracking improvement using type-2 fuzzy controller for wind system based on the double fed induction generator
von: Kaddache, M., et al.
Veröffentlicht: (2024)

Main types of reservoir rocks and their petrophysical properties of the western oil-gas region of Ukraine
von: Kurovets, I.M., et al.
Veröffentlicht: (2025)

Features of excitation of a linear electromechanical converter of induction type from an AC source
von: Bolyukh, V.F., et al.
Veröffentlicht: (2021)

The quick recovery of thermal loads by impact spectral functions method
von: Слесаренко, Анатолий Павлович, et al.
Veröffentlicht: (2013)

Increasing the accuracy of solution of geometrical inverse heat conduction problems at the expense of a priori information about unknown geometric characteristics
von: Костиков, А. О.
Veröffentlicht: (2012)

Regional -structural modeling and identification of the high speed oscillating heat processes
von: Слесаренко, А. П., et al.
Veröffentlicht: (2013)

The quick recovery of thermal loads by impact spectral functions method
von: Слесаренко, Анатолий Павлович, et al.
Veröffentlicht: (2013)

Increasing the accuracy of solution of geometrical inverse heat conduction problems at the expense of a priori information about unknown geometric characteristics
von: Костиков, А. О.
Veröffentlicht: (2012)

Regional -structural modeling and identification of the high speed oscillating heat processes
von: Слесаренко, А. П., et al.
Veröffentlicht: (2013)

Structural difference approach to mathematical modeling high heat exchange processes with unsteady heat transfer on the surface of constructive elements
von: Слесаренко, А. П., et al.
Veröffentlicht: (2016)

Structural difference approach to mathematical modeling high heat exchange processes with unsteady heat transfer on the surface of constructive elements
von: Слесаренко, А. П., et al.
Veröffentlicht: (2016)

Electromechanical processes during the start of induction-type magnetic levitation
von: Bolyukh, V. F.
Veröffentlicht: (2025)

EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
von: Kostiukov, I. A.
Veröffentlicht: (2014)

Modeling of the no dissipative heat transport in no classical medium
von: Немченко, К. Э., et al.
Veröffentlicht: (2016)

Modeling of the no dissipative heat transport in no classical medium
von: Немченко, К. Э., et al.
Veröffentlicht: (2016)

Highly Efficient Cogeneration Power Plant with Deep Regeneration Based on Air Brayton Cycle
von: Rusanov, Andrii V., et al.
Veröffentlicht: (2019)

Highly Efficient Cogeneration Power Plant with Deep Regeneration Based on Air Brayton Cycle
von: Rusanov, Andrii V., et al.
Veröffentlicht: (2019)

Improvement of mathematical models of heat and mass transfer processes in hydrogen metal hydride systems
von: Чорна, Н. А.
Veröffentlicht: (2013)

Improvement of mathematical models of heat and mass transfer processes in hydrogen metal hydride systems
von: Чорна, Н. А.
Veröffentlicht: (2013)

Studying the efficiency of the electrode materials operation in the electrolysis systems providing a separate cycle of gas generation
von: Соловей, Виктор Васильевич, et al.
Veröffentlicht: (2015)