Cover Image

INFLUENCE OF FERROMAGNETIC CORE PARAMETERS ON INDUCTION-TYPE DYNAMIC MOTOR EFFICIENCY

A mathematical model of a locked induction-type dynamic motor with a ferromagnetic core is developed. A performance criterion allowing for a set of the motor’s force and dimension indices is introduced. Mathematical modeling of the motor’s processes under various parameters of the ferromagnetic core...

Full description

Saved in:

Bibliographic Details
Date:	2012
Main Authors:	Bolyukh, V. F., Oleksenko, S. V., Schukin, I. S.
Format:	Article
Language:	Russian
Published:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2012
Subjects:	induction-type dynamic motor mathematical model ferromagnetic core 621.313 536.2.24 539.2
Online Access:	http://eie.khpi.edu.ua/article/view/2074-272X.2012.6.04
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Similar Items

EXPERIMENTAL STUDY OF FERROMAGNETIC CORE PARAMETERS INFLUENCE ON ELECTROMECHANICAL CHARACTERISTICS OF A LINEAR INDUCTION-DYNAMIC CONVERTER
by: Bolyukh, V. F., et al.
Published: (2014)

EFFICIENCY OF LINEAR PULSE ELECTROMECHANICAL CONVERTERS DESIGNED TO CREATE IMPACT LOADS AND HIGH SPEEDS
by: Bolyukh, V. F., et al.
Published: (2015)

INVESTIGATION OF LINEAR PULSE ELECTROMECHANICAL CONVERTER OF INDUCTION TYPE WITH DOUBLE ARMATURE INTENDED FOR DESTROYING INFORMATION ON SSD STORAGE DEVICE
by: Bolyukh, V. F., et al.
Published: (2018)

A COMPARATIVE ANALYSIS OF CONSTRUCTIVE SCHEMES OF LINEAR IMPACTOR ELECTROMECHANICAL CONVERTERS COMBINED TYPE
by: Bolyukh, V. F., et al.
Published: (2015)

ELECTROMECHANICAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH A MOVABLE INDUCTOR AND TWO ARMATURES
by: Bolyukh, V. F., et al.
Published: (2018)

AN OPTIMIZATION APPROACH TO THE CHOICE OF PARAMETERS OF LINEAR PULSE INDUCTION ELECTROMECHANICAL CONVERTER
by: Bolyukh, V. F., et al.
Published: (2018)

INFLUENCE OF ARMATURE PARAMETERS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER ON ITS EFFICIENCY
by: Bolyukh, V. F., et al.
Published: (2017)

INVESTIGATION OF THERMAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER OF CYCLIC ACTION
by: Bolyukh, V. F., et al.
Published: (2017)

HIGH-PERFORMANCE ELECTROMECHANICAL AND ELECTROMAGNETIC PULSE DEVICES FOR DESTRUCTION OF INFORMATION ON DIGITAL DRIVES
by: Bolyukh, V. F., et al.
Published: (2015)

A TECHNIQUE OF EXPERIMENTAL INVESTIGATIONS OF LINEAR IMPULSE ELECTROMECHANICAL CONVERTERS
by: Bolyukh, V. F., et al.
Published: (2017)

EXCITATION WITH A SERIES OF PULSES OF A LINEAR PULSE ELECTRODYNAMIC TYPE CONVERTER OPERATING IN POWER AND HIGH-SPEED MODES
by: Bolyukh, V. F., et al.
Published: (2020)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
by: Bolyukh, V. F., et al.
Published: (2019)

INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
by: Bolyukh, V. F., et al.
Published: (2018)

Total harmonic distortion analysis of inverter fed induction motor drive using neuro fuzzy type-1 and neuro fuzzy type-2 controllers
by: Srinivas, G., et al.
Published: (2024)

HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
by: Shurub, Yu. V., et al.
Published: (2020)

Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
by: Petrenko, A. N., et al.
Published: (2012)

CALCULATION OF MAGNETIC FIELD OF THREE-PHASE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS COVERED BY FERROMAGNETIC CORES
by: Rozov, V. Yu., et al.
Published: (2017)

IMITATION MODEL OF A HIGH-SPEED INDUCTION MOTOR WITH FREQUENCY CONTROL
by: Pliugin, V. E., et al.
Published: (2017)

A mathematical model of an induction motor with the stator and rotor unsymmetry
by: Chaban, V. Y., et al.
Published: (2012)

COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
by: Petrushin, V. S., et al.
Published: (2016)

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
by: Petrushin, V. S., et al.
Published: (2014)

MODELLING OF DYNAMIC MODES OF AN INDUCTION ELECTRIC DRIVE AT PERIODIC LOAD
by: Malyar, V. S., et al.
Published: (2020)

PREMATURE FAILURE OF MEDIUM-POWER TWO-POLE INDUCTION MOTOR WINDINGS
by: Lushchik, V. D., et al.
Published: (2013)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
by: Petrushin, V. S., et al.
Published: (2012)

THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
by: Lobov, V. I., et al.
Published: (2017)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
by: Malyar, V. S., et al.
Published: (2022)

ANALYSIS OF THE OPERATION PECULIARITIES OF THE SUPERCONDUCTING INDUCTIVE CURRENT LIMITER WITH ADDITIONAL SUPERCONDUCTING SCREEN
by: Dan'ko, V. G., et al.
Published: (2017)

COMPARISON OF ENERGY CONSUMPTION OF VARIOUS ELECTRICAL MOTORS OPERATING IN A PUMPING UNIT
by: Goman, V. V., et al.
Published: (2020)

Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
by: Malyar, V. S., et al.
Published: (2021)

SIMULATION OF MAGNETIC INDUCTION DISTRIBUTION IN A COAXIAL LINEAR MOTOR WITH AXIAL AND RADIAL DIRECTION OF PERMANENT MAGNETS MAGNETIZATION
by: Golenkov, G. M., et al.
Published: (2014)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
by: Zagirnyak, M. V., et al.
Published: (2014)

A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
by: Vasyliv, K. M.
Published: (2017)

Energy-efficient induction motors designing with application of a modified criterion of reduced costs
by: Petrushin, V. S.
Published: (2014)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
by: Vaskovskyi, Yu. M., et al.
Published: (2013)

A METHOD OF AUTOMATIC DETERMINATION OF THE NUMBER OF THE ELECTRICAL MOTORS SIMULTANEOUSLY WORKING IN GROUP
by: Voloshko, A. V., et al.
Published: (2016)

Investigation of a three-phase-single-phase induction electric drive under stochastic loads
by: Shurub, Yu. V.
Published: (2014)

DISTRIBUTION OF MAGNETIC INDUCTION LINEAR SYNCHRONUS MOTOR WITH MAGNETIC SUSPENSION
by: Golenkov, G. M., et al.
Published: (2013)

MAGNETIC CORE APPLICATION IN A PLANAR RESONATOR WITH A YTTRIUM IRON GARNET FILM FOR ENHANCING STRONG PHOTON-MAGNON COUPLING
by: Vakula, A. S., et al.
Published: (2024)

FORMATION OF CHARACTERISTICS OF OPERATING MODES OF SWITCHED RELUCTANCE MOTORS WITH PERIODIC LOAD
by: Bibik, O. V., et al.
Published: (2019)

MECHANICAL CHARACTERISTICS OF THREE-PHASE INDUCTION MOTORS WITH SINGLE-PHASE POWER SUPPLY
by: Malyar, V. S., et al.
Published: (2016)