A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
Analysis of electromagnetic processes excited by the field of an open flat circular coil placed above a thin-walled sheet metal has been carried out in this article The basic relations for time-space distribution calculation of eddy currents in the considered inductor system have been derived. The o...
Збережено в:
| Дата: | 2012 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Russian |
| Опубліковано: |
National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine”
2012
|
| Теми: | |
| Онлайн доступ: | http://eie.khpi.edu.ua/article/view/2074-272X.2012.6.10 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Репозитарії
Electrical Engineering & Electromechanics| Резюме: | Analysis of electromagnetic processes excited by the field of an open flat circular coil placed above a thin-walled sheet metal has been carried out in this article The basic relations for time-space distribution calculation of eddy currents in the considered inductor system have been derived. The obtained analytical relations have allowed making numerical evaluations and plotting three-dimensional amplitude-space distribution diagrams of induced current density in the thin-walled sheet metal. |
|---|