INVESTIGATION OF HIGH-CURRENT INTERRUPTING CONTACTS WORKING SURFACES MECHANICAL INTERACTION NATURE
Introduction. The nature of the interaction of high-working surfaces of the electrical contact uniquely affects their performance. By the failure of the contacts in the main drive processes resulting from complex destructive factors affecting their performance. However, not all processes are studied...
Saved in:
| Date: | 2016 |
|---|---|
| Main Authors: | Volkova, O. G., Zhornyak, L. B. |
| Format: | Article |
| Language: | English Russian |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2016
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/2074-272X.2016.1.02 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
Determination of economically justified parameters of synchronous disconnection at low-voltage circuit switching via a synchronous vacuum contactor
by: Verkhola, A. V.
Published: (2014)
by: Verkhola, A. V.
Published: (2014)
Ecologically clean evaporation-condensation method application for obtaining of electrical contacts based on copper composite materials
by: Grechanuyk, V.G., et al.
Published: (2018)
by: Grechanuyk, V.G., et al.
Published: (2018)
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
by: Мирсалимов, В. М., et al.
Published: (2014)
by: Мирсалимов, В. М., et al.
Published: (2014)
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
by: Мирсалимов, В. М., et al.
Published: (2014)
by: Мирсалимов, В. М., et al.
Published: (2014)
Contact deformation of the pipeline sealing unit
by: Kostikov, Andrii O., et al.
Published: (2021)
by: Kostikov, Andrii O., et al.
Published: (2021)
Contact deformation of the pipeline sealing unit
by: Kostikov, Andrii O., et al.
Published: (2021)
by: Kostikov, Andrii O., et al.
Published: (2021)
Solution of contact problem for plane weakened of variable width slot in inhomogeneous stress field
by: Гасанов, Ш. Г.
Published: (2017)
by: Гасанов, Ш. Г.
Published: (2017)
Solution of contact problem for plane weakened of variable width slot in inhomogeneous stress field
by: Гасанов, Ш. Г.
Published: (2017)
by: Гасанов, Ш. Г.
Published: (2017)
Parametric models for investigation of contact interaction of elements stamp tools
by: Демина, Наталья Анатольевна
Published: (2014)
by: Демина, Наталья Анатольевна
Published: (2014)
Parametric models for investigation of contact interaction of elements stamp tools
by: Демина, Наталья Анатольевна
Published: (2014)
by: Демина, Наталья Анатольевна
Published: (2014)
COMSOL MULTIPHYSICS BASED CALCULATION OF CONTACT PRESSURE IN MECHANICAL SYSTEMS
by: Baida, E. I.
Published: (2013)
by: Baida, E. I.
Published: (2013)
Contact of rectangular punch with rounded edges with a half-space
by: Ткачук, Н. Н., et al.
Published: (2014)
by: Ткачук, Н. Н., et al.
Published: (2014)
Contact of rectangular punch with rounded edges with a half-space
by: Ткачук, Н. Н., et al.
Published: (2014)
by: Ткачук, Н. Н., et al.
Published: (2014)
Mathematical modeling of contact interaction of stamp rigging elements
by: Демина, Н. А.
Published: (2014)
by: Демина, Н. А.
Published: (2014)
Mathematical modeling of contact interaction of stamp rigging elements
by: Демина, Н. А.
Published: (2014)
by: Демина, Н. А.
Published: (2014)
CHALLENGES OF DYNAMIC SIMULATION OF HIGH-SPEED ELECTROMAGNETIC VALVES OF GAS DISTRIBUTION DEVICES
by: Baida, E. I., et al.
Published: (2020)
by: Baida, E. I., et al.
Published: (2020)
APPLICATION OF THE COMPUTING ENVIRONMENT MAPLE TO THE CALCULATION OF THE DYNAMICS OF THE ELECTROMAGNETS IN THE COMPLICATED SYSTEMS OF FORCED CONTROL
by: Baida, E. I., et al.
Published: (2019)
by: Baida, E. I., et al.
Published: (2019)
ELECTROSTATIC PROCESSES IN POWER CABLES
by: Bezprozvannych, G. V., et al.
Published: (2013)
by: Bezprozvannych, G. V., et al.
Published: (2013)
Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
by: Mir-Salim-zade, Minavar V.
Published: (2018)
by: Mir-Salim-zade, Minavar V.
Published: (2018)
Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
by: Mir-Salim-zade, Minavar V.
Published: (2018)
by: Mir-Salim-zade, Minavar V.
Published: (2018)
PECULIARITIES OF CALCULATING STATIONARY HEATING OF WINDINGS OPERATING IN COMPLEX FORCED CONTROL SYSTEMS
by: Baida, E. I., et al.
Published: (2019)
by: Baida, E. I., et al.
Published: (2019)
THE IMPACT OF THE CONTACT SUBALKALINE GABBROIDS (MAFITES) OF POCROVO-KYRIYV MASSIF IN ALKALINE GRANITES
by: Kryvdik, S.G., et al.
Published: (2016)
by: Kryvdik, S.G., et al.
Published: (2016)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
by: Мир-Салим-заде, М. В.
Published: (2017)
by: Мир-Салим-заде, М. В.
Published: (2017)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
by: Мир-Салим-заде, М. В.
Published: (2017)
by: Мир-Салим-заде, М. В.
Published: (2017)
Closure of a curvilinear crack in sheet element under influence of temperature field
by: Мирсалимов, В. М., et al.
Published: (2016)
by: Мирсалимов, В. М., et al.
Published: (2016)
Closure of a curvilinear crack in sheet element under influence of temperature field
by: Мирсалимов, В. М., et al.
Published: (2016)
by: Мирсалимов, В. М., et al.
Published: (2016)
Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
by: Palkov, Ihor A., et al.
Published: (2019)
by: Palkov, Ihor A., et al.
Published: (2019)
Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
by: Palkov, Ihor A., et al.
Published: (2019)
by: Palkov, Ihor A., et al.
Published: (2019)
Optimum displacement function of external contour points of contact pair hub taking into account the thermal stresses and roughness inner contour
by: Ахундова, Парвана Эльман гызы
Published: (2014)
by: Ахундова, Парвана Эльман гызы
Published: (2014)
Optimum displacement function of external contour points of contact pair hub taking into account the thermal stresses and roughness inner contour
by: Ахундова, Парвана Эльман гызы
Published: (2014)
by: Ахундова, Парвана Эльман гызы
Published: (2014)
Mathematical simulation of thermal condition of a brush contact device in a three-dimensional setting
by: Tretiak, O. V.
Published: (2018)
by: Tretiak, O. V.
Published: (2018)
Mathematical simulation of thermal condition of a brush contact device in a three-dimensional setting
by: Tretiak, O. V.
Published: (2018)
by: Tretiak, O. V.
Published: (2018)
Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
by: Zaytsev, Boris F., et al.
Published: (2018)
by: Zaytsev, Boris F., et al.
Published: (2018)
Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
by: Zaytsev, Boris F., et al.
Published: (2018)
by: Zaytsev, Boris F., et al.
Published: (2018)
CONTACT POTENTIAL DIFFERENCE AS A MEASURE OF POWER CABLE POLYMER INSULATION AGING
by: Bezprozvannych, G. V., et al.
Published: (2014)
by: Bezprozvannych, G. V., et al.
Published: (2014)
CONTROLLABILITY OF NON-CONTACT MAGNETIC PULSE STRAIGHTENING
by: Gnatov, A. V.
Published: (2013)
by: Gnatov, A. V.
Published: (2013)
ANALYSIS OF METHODS FOR MONITORING OF EXISTING ENERGY OBJECTS GROUNDING DEVICES STATE AT THE PRESENT STAGE
by: Koliushko, D. G., et al.
Published: (2019)
by: Koliushko, D. G., et al.
Published: (2019)
Long-term data storage media
by: Petrov, V. V., et al.
Published: (2018)
by: Petrov, V. V., et al.
Published: (2018)
Design Improvement of Stuffing Box Seals of Centrifugal Pump Shafts, Based on the Study of the Sealing Mechanism Physical Model
by: Shevchenko, Serhii S.
Published: (2025)
by: Shevchenko, Serhii S.
Published: (2025)
Design Improvement of Stuffing Box Seals of Centrifugal Pump Shafts, Based on the Study of the Sealing Mechanism Physical Model
by: Shevchenko, Serhii S.
Published: (2025)
by: Shevchenko, Serhii S.
Published: (2025)
Similar Items
-
Determination of economically justified parameters of synchronous disconnection at low-voltage circuit switching via a synchronous vacuum contactor
by: Verkhola, A. V.
Published: (2014) -
Ecologically clean evaporation-condensation method application for obtaining of electrical contacts based on copper composite materials
by: Grechanuyk, V.G., et al.
Published: (2018) -
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
by: Мирсалимов, В. М., et al.
Published: (2014) -
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
by: Мирсалимов, В. М., et al.
Published: (2014) -
Contact deformation of the pipeline sealing unit
by: Kostikov, Andrii O., et al.
Published: (2021)