Buchumschlag

EFFICIENCY EVALUATION TECHNIQUE OF THE SEMICONDUCTOR DC-DC CONVERTER APPLICATION IN THE POWER-SUPPLY SYSTEM

Purpose. To specify efficiency evaluation of the DС-DC power semiconductor converter application in the power-supply system. Methodology. We have chosen application version of converter and then used the statistical modeling of DC-DC converter for its efficiency evaluation at varied input voltage ac...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	Poliakov, M. A., Larionova, T. Y.
Format:	Artikel
Sprache:	Englisch Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2016
Schlagworte:	semiconductor converter efficiency of converter application statistical modeling evaluation of the effectiveness converter efficiency 621.314.1 621.3.017
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2016.5.03
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

A COMPARATIVE ANALYSIS OF CONSTRUCTIVE SCHEMES OF LINEAR IMPACTOR ELECTROMECHANICAL CONVERTERS COMBINED TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

DETERMINATION OF PULSATION FACTORS OF THE SYSTEM OF SUPPRESSION OF INTERFERING HARMONICS OF A SEMICONDUCTOR CONVERTER
von: Panchenko, V. V., et al.
Veröffentlicht: (2018)

INFLUENCE OF ARMATURE PARAMETERS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER ON ITS EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

Designing the optimal number of active branches in a multi-branch buck-boost converter
von: Kovacova, I., et al.
Veröffentlicht: (2025)

EFFICIENCY OF LINEAR PULSE ELECTROMECHANICAL CONVERTERS DESIGNED TO CREATE IMPACT LOADS AND HIGH SPEEDS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

Design and control of a DC-DC buck converter using discrete Takagi-Sugeno fuzzy models
von: Ayada, A., et al.
Veröffentlicht: (2025)

PERFORMANCE COMPARISON OF MULTICELL SERIES AND NPC MULTILEVEL CONVERTERS FOR A STATCOM
von: Belakehal, S., et al.
Veröffentlicht: (2019)

Integrated through-silicon-via-based inductor design in buck converter for improved efficiency
von: Namoune, A., et al.
Veröffentlicht: (2023)

Bipolar DC output fed grounded DC-AC converter for photovoltaic application
von: Sindhuja, R., et al.
Veröffentlicht: (2023)

Integrating dual active bridge DC-DC converters: a novel energy management approach for hybrid renewable energy systems
von: Sabhi, K., et al.
Veröffentlicht: (2025)

Analysis of three-phase power transformer laminated magnetic core designs
von: Levin, M. I., et al.
Veröffentlicht: (2014)

Acceleration of exit to steady-state mode when modeling semiconductor converters
von: Yagup, V. G., et al.
Veröffentlicht: (2023)

SUBWAY POWER SYSTEMS WITH MODERN SEMICONDUCTOR CONVERTERS AND ENERGY STORAGE DEVICES
von: Zhemerov, George G., et al.
Veröffentlicht: (2013)

Energy and power in power supply systems with semiconductor converters and energy storage
von: Zhemerov, George G., et al.
Veröffentlicht: (2014)

Experimental study of electromagnetic disturbances in common and differential modes in a circuit based on two DC/DC boost static converter in parallel
von: Benazza, B., et al.
Veröffentlicht: (2023)

REVERSIBLE THYRISTOR CONVERTERS OF BRUSHLESS SYNCHRONOUS COMPENSATERS
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2013)

Novel modular multilevel matrix converter topology for efficient high-voltage AC-AC power conversion
von: Saidi, F., et al.
Veröffentlicht: (2024)

Modification of the adaptive algorithm for solving the twodimensional problem of charge distribution in photovoltaic converters with the existence of localized bands with large values of target function gradient
von: Reztsov, V., et al.
Veröffentlicht: (2017)

High efficiency power take-off system for the photovoltaic energy station
von: Zaitsev, R., et al.
Veröffentlicht: (2016)

NEW APPROACHES AT CONSTRUCTION OF MAGNETIC CONDUCTORS FOR MAINS TRANSFORMERS
von: Levin, M. I., et al.
Veröffentlicht: (2015)

CALCULATION OF OPERATING PARAMETERS OF HIGH-VOLTAGE POWER TAKE-OFF SYSTEM FOR THE PHOTOVOLTAIC FACILITY
von: Zaitsev, R. V., et al.
Veröffentlicht: (2016)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)

CONCEPT OF CONSTRUCTION OF POWER CIRCUITS OF A MULTILEVEL MODULAR CONVERTER AND ITS TRANSISTOR MODULES
von: Zhemerov, George G., et al.
Veröffentlicht: (2018)

Efficiency of multi-armature linear pulse electromechanical power and speed converters
von: Bolyukh, V. F., et al.
Veröffentlicht: (2024)

AN OPTIMIZATION APPROACH TO THE CHOICE OF PARAMETERS OF LINEAR PULSE INDUCTION ELECTROMECHANICAL CONVERTER
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

A DETERMINATION OF THE FLUX DENSITY IN CORE OF DISTRIBUTION TRANSFORMERS, WHAT BUILT WITH THE COMMON USING OF GRAIN AND NON GRAIN ORIENTED MAGNETIC STEELS
von: Pentegov, I. V., et al.
Veröffentlicht: (2015)

Design of LLC resonant converter with silicon carbide MOSFET switches and nonlinear adaptive sliding controller for brushless DC motor system
von: Merlin Suba, G., et al.
Veröffentlicht: (2022)

A TECHNIQUE OF EXPERIMENTAL INVESTIGATIONS OF LINEAR IMPULSE ELECTROMECHANICAL CONVERTERS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

New adaptive modified perturb and observe algorithm for maximum power point tracking in photovoltaic systems with interleaved boost converter
von: Makhlouf, M., et al.
Veröffentlicht: (2025)

Development of a boost-inverter converter under electromagnetic compatibility stress equipping a photovoltaic generator
von: Bechekir, S., et al.
Veröffentlicht: (2023)

MODELLING OF OPERATION MODES AND ELECTROMAGNETIC INTERFERENCES OF GaN-TRANSISTOR CONVERTERS
von: Onikienko, Y. O., et al.
Veröffentlicht: (2020)

Design and evaluation of a hybrid offshore wave energy converter and floating photovoltaic system for the region of Oran, Algeria
von: Araria, R., et al.
Veröffentlicht: (2024)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2019)

STABILITY ANALYSIS OF HYBRID ENERGY STORAGE BASED ON SUPERCAPACITOR AND BATTERY
von: Bondarenko, O. F., et al.
Veröffentlicht: (2020)

COMPARISON OF CHARACTERISTICS OF THE CONVERTER-FED MOTOR AT SUPPLY FROM THE SINGLE-PHASE NETWORK AND FROM THE SOURCE OF THE DIRECT CURRENT
von: Finkelshtein, V. B., et al.
Veröffentlicht: (2015)

COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)

ENERGY EFFICIENCY OF THE SUBWAY ELECTRICAL SUPPLY SYSTEM WITH ELECTRICAL ENERGY RECOVERY AT BRAKING
von: Zhemerov, George G., et al.
Veröffentlicht: (2019)

Analysis of suitable converter for the implementation of drive system in solar photovoltaic panels
von: Themozhi, G., et al.
Veröffentlicht: (2024)

FEATURES OF EDDY CURRENT DISTRIBUTION IN A HOLLOW PERFORATED ROTOR OF A POLYFUNCTIONAL ELECTROMECHANICAL CONVERTER
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)

EXCITATION WITH A SERIES OF PULSES OF A LINEAR PULSE ELECTRODYNAMIC TYPE CONVERTER OPERATING IN POWER AND HIGH-SPEED MODES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2020)