Buchumschlag

RESEARCH OF DYNAMIC PARAMETERS OF THE ELECTRIC DRIVE ON THE BASIS OF ROLLING ROTOR MOTOR

Purpose. Development and investigation of a dynamic model of electric drive on the base of the rolling rotor motor (RRM) which reflects the positioning of the actuator of the locking and regulating equipment in time. Methodology. Analytical description of electromagnetic and mechanical processes in...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	Kulinchenko, G. V., Maslennikov, A. M., Baguta, V. A.
Format:	Artikel
Sprache:	Englisch Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2016
Schlagworte:	rolling rotor motor time constant positioning control dynamics 621.255.2001.24
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2016.6.02
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

CAST-FILM POLYMER COMPOSITION DOSING SYSTEM DRIVE CONTROL
von: Kulinchenko, G. V., et al.
Veröffentlicht: (2014)

STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2020)

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
von: Ustenko, A. V., et al.
Veröffentlicht: (2013)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

Wavelet packet analysis for rotor bar breakage in an inverter induction motor
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)

Finite-time robust position tracking control for DC motors under uncertain dynamics
von: Nguyen, Q. B., et al.
Veröffentlicht: (2026)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
von: Moussaoui, L.
Veröffentlicht: (2022)

Brushless DC motor drive with optimal fractional-order sliding-mode control based on a genetic algorithm
von: Alnaib, I. I., et al.
Veröffentlicht: (2025)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
von: Tran, C. D., et al.
Veröffentlicht: (2024)

A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
von: Malyar, V. S., et al.
Veröffentlicht: (2019)

Fuzzy logic-based vector control of permanent magnet synchronous motor drives under inter-turn short-circuit fault conditions
von: Laamari, Y., et al.
Veröffentlicht: (2025)

Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
von: Petrenko, A. N., et al.
Veröffentlicht: (2012)

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
von: Abed, K., et al.
Veröffentlicht: (2024)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)

DETERMINATION OF RAILWAY ROLLING STOCK OPTIMAL MOVEMENT MODES
von: Petrenko, A. N., et al.
Veröffentlicht: (2017)

RADAR DETERMINATION OF SHIP ROLL PERIOD IN ROUGH SEAS
von: Gorobets, V. N., et al.
Veröffentlicht: (2025)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
von: Saifi, R.
Veröffentlicht: (2023)

INFLUENCE OF FERROMAGNETIC CORE PARAMETERS ON INDUCTION-TYPE DYNAMIC MOTOR EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2012)

Sensorless control of switched reluctance motor based on a simple flux linkage model
von: Fan, J., et al.
Veröffentlicht: (2023)

Improvement of technical processes for producing cast rotor parts to increase performance characteristics of traction elecric drive
von: Акімов, Олег Вікторович
Veröffentlicht: (2014)

Improvement of technical processes for producing cast rotor parts to increase performance characteristics of traction elecric drive
von: Акімов, Олег Вікторович
Veröffentlicht: (2014)

Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
von: Nemouchi, B., et al.
Veröffentlicht: (2024)

PROSPECTS FOR THE USE OF LIMITED-ANGLE TORQUE MOTORS IN RENEWABLE ENERGY SYSTEMS
von: Chumak , V., et al.
Veröffentlicht: (2025)

CHARACTERISTICS OF A 4-PHASE VALVE RELUCTANCE MOTOR WHEN POWERED BY UNCAPACITOR SWITCHBOARD
von: Finkelshtein, V. B., et al.
Veröffentlicht: (2016)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2021)

POWER CHARACTERISTICS OF A VIBRATOR WITH A LINEAR NONSALIENT-POLE ARMATURE MOTOR DRIVE
von: Bondar, R. P.
Veröffentlicht: (2014)

THE INFLUENCE OF AERODYNAMIC CHARACTERISTICS OF A BLADE PROFILE ON THE ENERGY CHARACTERISTICS OF A WINDOW ROTOR
von: Holovko, V., et al.
Veröffentlicht: (2019)

A robust hybrid control strategy for enhancing torque stability and performance in PMSM drives
von: Nhi, V. T. K., et al.
Veröffentlicht: (2025)

OBJECTIVE FUNCTIONS OF THE COMPARATIVE ANALYSIS OF THE ENERGY EFFICIENCY OF ELECTROMAGNETIC SYSTEMS OF INDUCTION MOTORS WITH INNER AND OUTER ROTORS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

Electromechanical guidance system based on a fuzzy proportional-plus-differential position controller
von: Paranchuk, Ya. S., et al.
Veröffentlicht: (2021)

HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
von: Shurub, Yu. V., et al.
Veröffentlicht: (2020)

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
von: Guezi, A., et al.
Veröffentlicht: (2022)

COORDINATED CONTROL OF MOTOR-GENERATOR VARIABLES IN THE ELECTRIC BREAKING MODE
von: Teriaiev, V., et al.
Veröffentlicht: (2020)

The results of an investigation into the application of the micro-stepping mode when controlling a stepper motor
von: Косяк, І. В., et al.
Veröffentlicht: (2022)

Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
von: Malyar, V. S., et al.
Veröffentlicht: (2021)