ANALYSIS OF THERMAL STATE OF TRACTION BRUSHLESS PERMANENT MAGNET MOTOR FOR MINE ELECTRIC LOCOMOTIVE

ANALYSIS OF THERMAL STATE OF TRACTION BRUSHLESS PERMANENT MAGNET MOTOR FOR MINE ELECTRIC LOCOMOTIVE

Purpose. The study was conducted to analyze thermal state of the traction permanent magnet synchronous motor for mine electric battery locomotive when operating in continuous and short-time duty modes. These operating modes are selected for study, as they are typical for mine electric locomotives. M...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
1. Verfasser:	Matyuschenko, A. V.
Format:	Artikel
Sprache:	English Russian
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2016
Schlagworte:	brushless motor heat generation temperature losses permanent magnet coil current resistance mathematical model FEM 621.313.13
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2016.6.03
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

MATHEMATICAL FIELD MODELS OF BRUSHLESS DC MOTORS WITH PERMANENT MAGNETS AND THEIR COMPARATIVE ANALYSIS
von: Matyuschenko, A. V.
Veröffentlicht: (2015)

MOTORSOLVE SOFTWARE PACKAGE: VERIFICATION OF PARAMETERS AND CHARACTERISTICS OF THE BRUSHLESS PERMANENT MAGNET MOTOR
von: Rymsha, V. V., et al.
Veröffentlicht: (2019)

Mathematical modeling of electromechanical processes in a brushless DC motor
von: Tkachuk, V. I., et al.
Veröffentlicht: (2014)

MODELING OF TRACTION SYNCHRONOUS PERMANENT MAGNET MOTOR MODES
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
von: Panchal, T. H., et al.
Veröffentlicht: (2022)

Model of pulsating current traction motor taking into consideration magnetic losses in steel
von: Goolak, S., et al.
Veröffentlicht: (2021)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
von: Liubarskyi, B. G., et al.
Veröffentlicht: (2021)

SIMULATION OF MAGNETIC INDUCTION DISTRIBUTION IN A COAXIAL LINEAR MOTOR WITH AXIAL AND RADIAL DIRECTION OF PERMANENT MAGNETS MAGNETIZATION
von: Golenkov, G. M., et al.
Veröffentlicht: (2014)

Development of the heat generator calculation method with permanent magnets for wind turbines
von: Permynov, Y., et al.
Veröffentlicht: (2017)

A MULTIPURPOSE SWITCHED RELUCTANCE MOTOR WITH A SERIES COMMUTATION BUFFER
von: Vasil'ev, L. A., et al.
Veröffentlicht: (2014)

AIRGAP MAGNETIC INDUCTION DISTRIBUTION IN A COAXIALLY-LINEAR SYNCHRONOUS MOTOR WITH AXIAL AND RADIAL DIRECTION OF THE RUNNER PERMANENT MAGNETS MAGNETIZATION
von: Golenkov, G. M., et al.
Veröffentlicht: (2013)

Brushless DC motor drive with optimal fractional-order sliding-mode control based on a genetic algorithm
von: Alnaib, I. I., et al.
Veröffentlicht: (2025)

DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2015)

DESIGN COMPARISON OF SYNCHRONOUS PERMANENT MAGNET GENERATOR FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2019)

COMPARISON OF PARAMETERS OF ASYNCHRONOUS AND SYNCHRONOUS ELECTRIC GENERATORS WITH PERMANENT MAGNETS EXCITATION FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2021)

REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
von: Kovalova, J. V.
Veröffentlicht: (2014)

TWO-DIMENSIONAL FEM-ANALYSIS OF EDDY CURRENTS LOSS IN LAMINATED MAGNETIC CIRCUITS
von: Makarchuk, O. V., et al.
Veröffentlicht: (2019)

MODELING OF OPERATION OF COAXIAL-LINEAR MOTORS WITH AXIAL AND RADIAL DIRECTIONS OF MAGNETIZATION OF PERMANENT MAGNETS IN DYNAMIC MODE
von: Golenkov, G. M., et al.
Veröffentlicht: (2014)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)

An adaptive controller for power quality control in high speed railway with electric locomotives with asynchronous traction motors
von: Chaib Ras, A., et al.
Veröffentlicht: (2024)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

OPERATION OF PERMANENT MAGNET SYNCHRONOUS GENERATOR APPLIED TO THE GRID CONNECTED WIND TURBINES
von: Permynov, Yu., et al.
Veröffentlicht: (2022)

COMPARISON OF TRADITIONAL PERMANENT MAGNET GENERATOR AND AXIAL FLUX PERMANENT MAGNET GENERATOR WITH DOUBLE-SIDED ACTIVE SURFACE FOR WIND TURBINE
von: Golovko, V., et al.
Veröffentlicht: (2018)

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)

ELECTRIC GENERATOR IN THE RECUPERATION SYSTEM OF THE ENERGY FROM MECHANICAL OSCILLATIONS IN VEHICLES
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2018)

Design of LLC resonant converter with silicon carbide MOSFET switches and nonlinear adaptive sliding controller for brushless DC motor system
von: Merlin Suba, G., et al.
Veröffentlicht: (2022)

STUDY OF FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR UNITS TEMPERATURE VERSUS LOAD AND POWER SUPPLY TYPE
von: Vakaruk, T. V., et al.
Veröffentlicht: (2014)

OPERATION OF THE SYNCHRONOUS GENERATOR WITH PERMANENT MAGNETS DURING THE MAGNETIZATION OF A SIDE CAPACITY
von: Kovalenko, I
Veröffentlicht: (2021)

COMPARISON OF ENERGY CONSUMPTION OF VARIOUS ELECTRICAL MOTORS OPERATING IN A PUMPING UNIT
von: Goman, V. V., et al.
Veröffentlicht: (2020)

A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
von: Vasyliv, K. M.
Veröffentlicht: (2017)

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
von: Ustenko, A. V., et al.
Veröffentlicht: (2013)

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
von: Guezi, A., et al.
Veröffentlicht: (2022)

Analysis of technical requirements for heating mains in geothermal heating supply systems
von: Oliinichenko, V.
Veröffentlicht: (2016)

Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
von: Petrenko, A. N., et al.
Veröffentlicht: (2012)

BRUSHLESS VALVE ELECTRIC DRIVE WITH MINIMUM EQUIPMENT EXCESS FOR AUTONOMOUS FLOATING VEHICLE
von: Volyanskaya, Ya. B., et al.
Veröffentlicht: (2017)

SYSTEM: COMPRESSION HEAT PUMP-FANCOIL, FEATURES OF CONSTRUCTION, EFFICIENCY
von: Zurian, О., et al.
Veröffentlicht: (2022)

EFFICIENCY OF THE BUFFER ACCUMULATOR OF THE HYDROTHERMAL HEAT PUMP SYSTEM AS A HEAT ENERGY ACCUMULATOR
von: Zurian, О., et al.
Veröffentlicht: (2023)

Influence of the shape of the input pulses on the characteristics of hybrid electromagnetic system with magnetic flux modulation
von: Yatchev, I., et al.
Veröffentlicht: (2021)

Smart current control of the wind energy conversion system based permanent magnet synchronous generator using predictive and hysteresis model
von: Zine, H. K. E., et al.
Veröffentlicht: (2024)