STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION
In this paper can be used to not-destructive technological testing of defects isolation enameled wire with polyimide polymer. The thesis is devoted to the statistical method for processing, comparison and analysis of results of measurements of parameters isolation it enameled wire because of mathema...
Saved in:
| Date: | 2017 |
|---|---|
| Main Authors: | , |
| Format: | Article |
| Language: | English Ukrainian |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2017
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/2074-272X.2017.1.08 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & Electromechanics| id |
eiekhpieduua-article-94109 |
|---|---|
| record_format |
ojs |
| institution |
Electrical Engineering & Electromechanics |
| baseUrl_str |
|
| datestamp_date |
2017-08-21T18:32:10Z |
| collection |
OJS |
| language |
English Ukrainian |
| topic |
enameled wire polyimide isolation isolation defective statistical model of the trend non-destructive testing 621.315.2 |
| spellingShingle |
enameled wire polyimide isolation isolation defective statistical model of the trend non-destructive testing 621.315.2 Golik, O. V. Shchebeniuk, L. A. STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION |
| topic_facet |
enameled wire polyimide isolation isolation defective statistical model of the trend non-destructive testing 621.315.2 эмаль провод полиимидная изоляция дефектность изоляции статистическая модель тренда технологический неразрушающий контроль 621.315.2 емаль провід поліімідна ізоляція дефектність ізоляції статистична модель тренду технологічний неруйнівний контроль 621.315.2 |
| format |
Article |
| author |
Golik, O. V. Shchebeniuk, L. A. |
| author_facet |
Golik, O. V. Shchebeniuk, L. A. |
| author_sort |
Golik, O. V. |
| title |
STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION |
| title_short |
STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION |
| title_full |
STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION |
| title_fullStr |
STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION |
| title_full_unstemmed |
STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION |
| title_sort |
statistic methods of polyimide enamel isolation defective non-destructive control at the conditions of production |
| title_alt |
СТАТИСТИЧНІ АСПЕКТИ НЕРУЙНІВНОГО КОНТРОЛЮ ДЕФЕКТНОСТІ ПОЛІІМІДНОЇ ЕМАЛЬІЗОЛЯЦІЇ В УМОВАХ ВИРОБНИЦТВА СТАТИСТИЧНІ АСПЕКТИ НЕРУЙНІВНОГО КОНТРОЛЮ ДЕФЕКТНОСТІ ПОЛІІМІДНОЇ ЕМАЛЬІЗОЛЯЦІЇ В УМОВАХ ВИРОБНИЦТВА |
| description |
In this paper can be used to not-destructive technological testing of defects isolation enameled wire with polyimide polymer. The thesis is devoted to the statistical method for processing, comparison and analysis of results of measurements of parameters isolation it enameled wire because of mathematical model of trend for application in active technological monitoring is developed; to development used of the recommendations for parameters of such testing. Is theoretically justified and the possibility of a diminution of dependence of an error from a velocity of movement of a wire for want of quantifying of defects enameled isolation not destroying tests by high voltage. This work is devoted to the statistical method for processing, comparison and analysis of results of measurements of parameters of polyimide isolation. The method is operating not destroying technological monitoring an amount of enameled isolation defect. The dependence of average value of amount of defects for enameled wire ПЭЭИДХ2 – 200 with two–sheeted polyimide by isolation in a range of nominal diameter 0.56 mm is experimentally determined. The technological monitoring purpose is reducing of quantifying of enameled isolation defect. |
| publisher |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine |
| publishDate |
2017 |
| url |
http://eie.khpi.edu.ua/article/view/2074-272X.2017.1.08 |
| work_keys_str_mv |
AT golikov statisticmethodsofpolyimideenamelisolationdefectivenondestructivecontrolattheconditionsofproduction AT shchebeniukla statisticmethodsofpolyimideenamelisolationdefectivenondestructivecontrolattheconditionsofproduction AT golikov statističníaspektinerujnívnogokontrolûdefektnostípolíímídnoíemalʹízolâcíívumovahvirobnictva AT shchebeniukla statističníaspektinerujnívnogokontrolûdefektnostípolíímídnoíemalʹízolâcíívumovahvirobnictva |
| first_indexed |
2025-07-17T11:46:41Z |
| last_indexed |
2025-07-17T11:46:41Z |
| _version_ |
1850411701659238400 |
| spelling |
eiekhpieduua-article-941092017-08-21T18:32:10Z STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION СТАТИСТИЧНІ АСПЕКТИ НЕРУЙНІВНОГО КОНТРОЛЮ ДЕФЕКТНОСТІ ПОЛІІМІДНОЇ ЕМАЛЬІЗОЛЯЦІЇ В УМОВАХ ВИРОБНИЦТВА СТАТИСТИЧНІ АСПЕКТИ НЕРУЙНІВНОГО КОНТРОЛЮ ДЕФЕКТНОСТІ ПОЛІІМІДНОЇ ЕМАЛЬІЗОЛЯЦІЇ В УМОВАХ ВИРОБНИЦТВА Golik, O. V. Shchebeniuk, L. A. enameled wire polyimide isolation isolation defective statistical model of the trend non-destructive testing 621.315.2 эмаль провод полиимидная изоляция дефектность изоляции статистическая модель тренда технологический неразрушающий контроль 621.315.2 емаль провід поліімідна ізоляція дефектність ізоляції статистична модель тренду технологічний неруйнівний контроль 621.315.2 In this paper can be used to not-destructive technological testing of defects isolation enameled wire with polyimide polymer. The thesis is devoted to the statistical method for processing, comparison and analysis of results of measurements of parameters isolation it enameled wire because of mathematical model of trend for application in active technological monitoring is developed; to development used of the recommendations for parameters of such testing. Is theoretically justified and the possibility of a diminution of dependence of an error from a velocity of movement of a wire for want of quantifying of defects enameled isolation not destroying tests by high voltage. This work is devoted to the statistical method for processing, comparison and analysis of results of measurements of parameters of polyimide isolation. The method is operating not destroying technological monitoring an amount of enameled isolation defect. The dependence of average value of amount of defects for enameled wire ПЭЭИДХ2 – 200 with two–sheeted polyimide by isolation in a range of nominal diameter 0.56 mm is experimentally determined. The technological monitoring purpose is reducing of quantifying of enameled isolation defect. Представлены результаты применения статистической модели тренда к анализу показателей дефектности изоляции при неразрушающем технологическом контроле эмаль провода на основе полиимидного полимера в условиях производства. Рассмотрено применение такого контроля для использования результатов в активном технологическом контроле. Предложены рекомендации для практического использования параметров функции тренда в технологическом контроле. Параметром тренда является скорость уменьшения (или увеличения) длины провода с заданной дефектностью в течение технологического цикла. Теоретически показана и измерениями подтвердждена возможность количественной оценки тенденции изменения в течение технологического цикла дефектности эмальизоляции для провода ПЭЭИДХ2 – 200 с двухслойной полиимидной изоляцией номинальным диаметром 0,56 мм. Выделение тенденции изменения дефектности эмаль изоляции в течение непрерывного технологического цикла и количественная оценка этой тенденции позволяет количественно оценить случайную ошибку технологического контроля – суммарную ошибку результатов технологического контроля, которая является характеристикой случайной составляющей стабильности технологического контроля и обусловлена большим количеством причин, влиянием каждой из которых можно пренебречь по сравнению с суммой. Представлено результати застосування статистичної моделі тренду до аналізу показників дефектності ізоляції при неруйнівному технологічному контролі емаль проводу на основі поліімідного полімеру в умовах виробництва. Розглянуто застосування цього контролю для використання результатів в активному технологічному контролі. Запропоновано рекомендації щодо практичного використання параметрів функції тренду в технологічному контролі. Параметром тренду є швидкість зменшення (чи збільшення) довжини проводу з заданою дефектністю впродовж технологічного циклу. Теоретично показана і вимірюваннями підтверджена можливість кількісної оцінки тенденції зміни впродовж технологічного циклу дефектності емаль ізоляції для проводу ПЭЭИДХ2 – 200 з двохшаровою поліімідною ізоляцією номінальним діаметром 0,56 мм. Виділення тенденції зміни дефектності емаль ізоляції впродовж неперервного технологічного циклу і кількісна оцінка цієї тенденції дозволяє кількісно оцінити випадкову похибку технологічного контролю – сумарну похибку результатів технологічного контролю, яка є характеристикою випадкової складової стабільності технологічного контролю і зумовлена багатьма чинниками, впливом кожного з яких можна знехтувати порівняно із сумою. National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2017-02-26 Article Article Peer-reviewed Article application/pdf application/pdf http://eie.khpi.edu.ua/article/view/2074-272X.2017.1.08 10.20998/2074-272X.2017.1.08 Electrical Engineering & Electromechanics; No. 1 (2017); 47-53 Электротехника и Электромеханика; № 1 (2017); 47-53 Електротехніка і Електромеханіка; № 1 (2017); 47-53 2309-3404 2074-272X en uk http://eie.khpi.edu.ua/article/view/2074-272X.2017.1.08/89722 http://eie.khpi.edu.ua/article/view/2074-272X.2017.1.08/89723 Copyright (c) 2017 O. V. Golik, L. A. Shchebeniuk https://creativecommons.org/licenses/by-nc/4.0 |