STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION
In this paper can be used to not-destructive technological testing of defects isolation enameled wire with polyimide polymer. The thesis is devoted to the statistical method for processing, comparison and analysis of results of measurements of parameters isolation it enameled wire because of mathema...
Gespeichert in:
| Datum: | 2017 |
|---|---|
| Hauptverfasser: | Golik, O. V., Shchebeniuk, L. A. |
| Format: | Artikel |
| Sprache: | English Ukrainian |
| Veröffentlicht: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2017
|
| Schlagworte: | |
| Online Zugang: | http://eie.khpi.edu.ua/article/view/2074-272X.2017.1.08 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsÄhnliche Einträge
-
ONLINE TECHNOLOGICAL MONITORING OF INSULATION DEFECTS IN ENAMELED WIRES
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2017) -
A STATISTICAL MODEL OF MONITORING OF INSULATION BREAKDOWN VOLTAGE STABILITY IN THE PROCESS OF ENAMELED WIRES PRODUCTION
von: Gurin, A. G., et al.
Veröffentlicht: (2019) -
STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS
von: Golik, O. V.
Veröffentlicht: (2016) -
EXPERIMENTAL RESEARCH ON DIELECTRIC STRENGTH OF PEEIDH-0.63 WIRE
von: Gurin, A. G., et al.
Veröffentlicht: (2013) -
HEAT TESTS OF POWER CABLES WITH XLPE INSULATION AT DIRECT VOLTAGES UP TO 110 KV
von: Antonets, T. Yu., et al.
Veröffentlicht: (2015)