AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS
Research on electrodynamical processes in a system with an open cylindrical single-turn coil and two parallel flat thin-walled conductors placed symmetrically on the both sides of the coil has been carried out in this article. On the basis of obtained analytical relations, numerical evaluations have...
Збережено в:
| Дата: | 2013 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Russian |
| Опубліковано: |
National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine”
2013
|
| Теми: | |
| Онлайн доступ: | http://eie.khpi.edu.ua/article/view/2074-272X.2013.1.14 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Репозитарії
Electrical Engineering & Electromechanics| Резюме: | Research on electrodynamical processes in a system with an open cylindrical single-turn coil and two parallel flat thin-walled conductors placed symmetrically on the both sides of the coil has been carried out in this article. On the basis of obtained analytical relations, numerical evaluations have been made and three-dimensional amplitude-space distribution diagrams of induced current density and attraction force generated by the coil field have been plotted for various-size discontinuity. |
|---|