AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS

• Дата: 2013
• Автор: Gnatov, A. V.
• Формат: Стаття
• Мова: Russian
• Опубліковано: National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine” 2013
• Теми: magnetic pulse metal working; induction inductor system; electrodynamical processes; 3D distribution diagrams; research; 624.318
• Онлайн доступ: http://eie.khpi.edu.ua/article/view/2074-272X.2013.1.14
• Назва журналу: Electrical Engineering & Electromechanics

Research on electrodynamical processes in a system with an open cylindrical single-turn coil and two parallel flat thin-walled conductors placed symmetrically on the both sides of the coil has been carried out in this article. On the basis of obtained analytical relations, numerical evaluations have...