To the analysis of methods of calculation of stability of use and their classification
The problem of assessing the stability of slopes is quite relevant in the development of mineral deposits in an open way, in hydraulic engineering and transport, industrial and civil engineering, as well as in other areas of human activity. Attempts to obtain the correct method of calculation led to...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Kyiv National University of Construction and Architecture
2019
|
| Теми: | |
| Онлайн доступ: | https://es-journal.in.ua/article/view/166705 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Environmental safety and natural resources |
Репозитарії
Environmental safety and natural resources| id |
es-journalinua-article-166705 |
|---|---|
| record_format |
ojs |
| institution |
Environmental safety and natural resources |
| baseUrl_str |
|
| datestamp_date |
2019-05-11T19:03:27Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
slope marginal equilibrium method limiting stress state method resilience |
| spellingShingle |
slope marginal equilibrium method limiting stress state method resilience Sirenko, Anatolii P. To the analysis of methods of calculation of stability of use and their classification |
| topic_facet |
slope marginal equilibrium method limiting stress state method resilience схил метод граничної рівноваги метод граничного напруженого стану стійкість |
| format |
Article |
| author |
Sirenko, Anatolii P. |
| author_facet |
Sirenko, Anatolii P. |
| author_sort |
Sirenko, Anatolii P. |
| title |
To the analysis of methods of calculation of stability of use and their classification |
| title_short |
To the analysis of methods of calculation of stability of use and their classification |
| title_full |
To the analysis of methods of calculation of stability of use and their classification |
| title_fullStr |
To the analysis of methods of calculation of stability of use and their classification |
| title_full_unstemmed |
To the analysis of methods of calculation of stability of use and their classification |
| title_sort |
to the analysis of methods of calculation of stability of use and their classification |
| title_alt |
До аналізу методів розрахунку стійкості схилів та їх класифікації |
| description |
The problem of assessing the stability of slopes is quite relevant in the development of mineral deposits in an open way, in hydraulic engineering and transport, industrial and civil engineering, as well as in other areas of human activity. Attempts to obtain the correct method of calculation led to the emergence of a large number of methods, methods of calculation and calculation schemes: their diversity is explained by the number of assumptions used by researchers to justify the calculation scheme and stability conditions. The task of determining the parameters of a steady slope or bearing capacity of the base in most cases is statically uncertain. Therefore, for the determination of unknown reactions, the authors put forward additional conditions (assumptions). The variety of existing methods for calculating the stability of slopes caused the need to classify them by one or another feature. Based on a detailed analysis of work in this area, four groups of basic assumptions put forward by researchers for substantiation of the calculation scheme for calculating the stability of slopes, obtaining stability conditions (equilibrium) of the shift prisms, the selection of the shape and position of the weakest surface of slip in the slopes were identified. These are assumptions such as: about the condition of the boundary stress state at each point of the bias prism (the method of the boundary stress state); about the distribution of normal reactions along the surface of the slip (methods of a monolithic compartment of collapse, that is, when considering the balance of the prism of the shear completely); the ratio of tangential and normal reactions at the lateral sides of the compartments (the reaction is horizontal, inclined or marginal rejected); in relation to the shape and position (geometry) of the potential (weakest) surface of the slide. In conclusion, it was concluded that the method of the boundary stress state is most useful for preventing collapses, then studying the shape of slopes and external loading, at which a possible collapse. The method of boundary equilibrium, in turn, is desirable to use for the analysis of a strained state of landslides. |
| publisher |
Kyiv National University of Construction and Architecture |
| publishDate |
2019 |
| url |
https://es-journal.in.ua/article/view/166705 |
| work_keys_str_mv |
AT sirenkoanatoliip totheanalysisofmethodsofcalculationofstabilityofuseandtheirclassification AT sirenkoanatoliip doanalízumetodívrozrahunkustíjkostíshilívtaíhklasifíkacíí |
| first_indexed |
2025-07-17T11:17:42Z |
| last_indexed |
2025-07-17T11:17:42Z |
| _version_ |
1850410727508017152 |
| spelling |
es-journalinua-article-1667052019-05-11T19:03:27Z To the analysis of methods of calculation of stability of use and their classification До аналізу методів розрахунку стійкості схилів та їх класифікації Sirenko, Anatolii P. slope marginal equilibrium method limiting stress state method resilience схил метод граничної рівноваги метод граничного напруженого стану стійкість The problem of assessing the stability of slopes is quite relevant in the development of mineral deposits in an open way, in hydraulic engineering and transport, industrial and civil engineering, as well as in other areas of human activity. Attempts to obtain the correct method of calculation led to the emergence of a large number of methods, methods of calculation and calculation schemes: their diversity is explained by the number of assumptions used by researchers to justify the calculation scheme and stability conditions. The task of determining the parameters of a steady slope or bearing capacity of the base in most cases is statically uncertain. Therefore, for the determination of unknown reactions, the authors put forward additional conditions (assumptions). The variety of existing methods for calculating the stability of slopes caused the need to classify them by one or another feature. Based on a detailed analysis of work in this area, four groups of basic assumptions put forward by researchers for substantiation of the calculation scheme for calculating the stability of slopes, obtaining stability conditions (equilibrium) of the shift prisms, the selection of the shape and position of the weakest surface of slip in the slopes were identified. These are assumptions such as: about the condition of the boundary stress state at each point of the bias prism (the method of the boundary stress state); about the distribution of normal reactions along the surface of the slip (methods of a monolithic compartment of collapse, that is, when considering the balance of the prism of the shear completely); the ratio of tangential and normal reactions at the lateral sides of the compartments (the reaction is horizontal, inclined or marginal rejected); in relation to the shape and position (geometry) of the potential (weakest) surface of the slide. In conclusion, it was concluded that the method of the boundary stress state is most useful for preventing collapses, then studying the shape of slopes and external loading, at which a possible collapse. The method of boundary equilibrium, in turn, is desirable to use for the analysis of a strained state of landslides. Проблема оцінки стійкості схилів є досить актуальною при розробці родовищ корисних копалин відкритим способом, в гідротехнічному і транспортному, промисловому і цивільному будівництві, а також в інших галузях діяльності людства. Спроби отримання коректного способу розрахунку привели до появи великої кількості способів, прийомів розрахунку і розрахункових схем: їх різноманіття пояснюється кількістю припущень, що використовуються дослідниками для обґрунтування розрахункової схеми, і умовами стійкості. Завдання з визначення параметрів стійкого схилу або несучої здатності основи в більшості випадків є статично невизначеним. Тому для визначення невідомих реакцій авторами висуваються додаткові умови (припущення). Різноманіття існуючих способів розрахунку стійкості схилів викликало необхідність класифікувати їх за тими чи іншими ознаками. На підставі детального аналізу робіт у цій галузі було виокремлено чотири групи основних припущень, висунутих дослідниками для обґрунтування схеми розрахунку стійкості схилів, отримання умов стійкості (рівноваги) призми зсуву, виділення форми і положення найбільш слабкої поверхні ковзання в схилах. Це такі допущення, як: про виконання умови граничного напруженого стану в кожній точці призми зміщення (метод граничного напруженого стану); про розподіл нормальних реакцій уздовж поверхні ковзання (способи монолітного відсіку обвалення, тобто коли розглядають рівновагу призми зсуву цілком); щодо співвідношення дотичних і нормальних реакцій по бічних гранях відсіків (реакція горизонтальна, нахилена або гранично відхилена); щодо форми і положення (геометрії) потенційної (найбільш слабкої) поверхні ковзання. У підсумку зроблено висновок, що метод граничного напруженого стану найбільш корисний для попередження обвалів, тобто вивчення форми схилів і зовнішнього навантаження, при яких можливе обвалення схилів. Метод граничної рівноваги, у свою чергу, бажано застосовувати для аналізу напруженого стану зсувів. Kyiv National University of Construction and Architecture 2019-04-01 Article Article application/pdf https://es-journal.in.ua/article/view/166705 10.32347/2411-4049.2019.1.79-86 Environmental safety and natural resources; Vol. 29 No. 1 (2019): Environmental safety and natural resources; 79-86 Екологічна безпека та природокористування; Том 29 № 1 (2019): Екологічна безпека та природокористування; 79-86 2616-2121 2411-4049 10.32347/2411-4049.2019.1 uk https://es-journal.in.ua/article/view/166705/166042 Copyright (c) 2019 Anatolii P. Sirenko https://creativecommons.org/licenses/by/4.0 |