Еnergy-saving technology for processing of galvanic sludge with obtaining of radio-absorbing materials

The prospective for increasing of environmental safety level of industrial enterprises is considered as result of realization of energy- and resource saving technology for processing galvanic sludge by hydrophase ferritisation method. The possibility of obtaining Ni-Cu-Zn ferrites by processing of g...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2020
Hauptverfasser: Samchenko, Dmitry N., Kochetov, Gennadii М., Vasiliev, Aleksey
Format: Artikel
Sprache:Ukrainian
Veröffentlicht: Kyiv National University of Construction and Architecture 2020
Schlagworte:
Online Zugang:https://es-journal.in.ua/article/view/213160
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Environmental safety and natural resources

Institution

Environmental safety and natural resources
Beschreibung
Zusammenfassung:The prospective for increasing of environmental safety level of industrial enterprises is considered as result of realization of energy- and resource saving technology for processing galvanic sludge by hydrophase ferritisation method. The possibility of obtaining Ni-Cu-Zn ferrites by processing of galvanic sludge based on of ferritization technology has been studied. Influence of different technological parameters and activation methods of the ferritisation process: thermal and electromagnetic pulse at temperatures of 75°С and 20°С, respectively, on qualitative and quantitative phase content of ferrite sediments has been experimentally determined. The method of electromagnetic pulse activation provides the appropriate degree of heavy metal ions extraction – 99.96%, and also has undeniable energy advantages over thermal, since energy consumption is reduced more than 60%. The efficiency of electromagnetic pulse discharges with magnetic induction amplitude of 0.298 T and a pulse frequency from 0.5 to 10 Hz to obtain environmentally friendly ferrite precipitates has been confirmed. The use of Ni-Cu-Zn ferrite powder for production of coatings that shield the electromagnetic rays in the ultrahigh frequency range is proposed. Obtained sediments have maximum content of crystalline ferromagnetic phases of ferrites – more than 93%. The proposed resource-saving ferritisation process prevents environmental pollution, ensures efficient and rational use of raw materials and energy in industry, as well as allows to obtain marketable products from industrial waste.