Analysis of technologies of disposal and use fibrous paper skopje

• Дата: 2024
• Автори: Петрушка, І.М., Мокрий, В.І., Дмитрів, Б.А.
• Формат: Стаття
• Мова: Ukrainian
• Опубліковано: Kyiv National University of Construction and Architecture 2024
• Теми: pulp and paper industry; waste; paper skopje; disposal technologies; reuse; environmental safety; reclamation
• Онлайн доступ: https://es-journal.in.ua/article/view/314073
• Назва журналу: Environmental safety and natural resources

The article examines the current state and trends in the development of waste management technologies in the pulp and paper industry, with the aim of analyzing the reasons that hinder, and sometimes make impossible, the effective utilization of fibrous waste paper to obtain environmentally safe materials and raw products. The production of paper products is one of the most capital-intensive and energy-intensive industries, second only to the metallurgical and chemical industries, with a correspondingly large amount of waste and a negative impact on the environment. The technological processes of scum formation as a result of waste paper recycling and paper production wastewater treatment are considered and analyzed. Skopje is the final waste of the pulp and paper industry, which is formed at various stages of the paper and cardboard manufacturing process, therefore it is deposited in landfills. Multiton volumes of skopje require significant areas for its storage. Despite the low IV hazard class, this leads to serious environmental problems, as the leachate from the skopje landfill pollutes surface and ground water. Technologies of possible disposal and reuse of skopje, known in domestic and foreign literature, are described and analyzed. The technology of reusing scoop is determined by its relatively environmentally safe physicochemical composition. The indicated fibrous, mineral, extractive constituents and lignin determine the possibility of reusing skopje, mainly for the construction industry. The perspective of the complex use of multi-tonnage waste – slag, sludge, ash and slag of thermal power plants as plasticizers, fillers, binders and binding components in the production of building structural and heat-insulating materials is named. Technologies for using scapula as a filler in the production of building materials require a high content of inorganic compounds and a minimum amount of organic compounds. A high content of fibrous particles and a low content of mineral substances is necessary when using scapula in the production of composite wood composite materials. The specified technological limitations ensure only small amounts of skopje use in the production of building materials. The effectiveness of using skopje as an additive to the asphalt mixture for road construction and production of fuel materials is determined by the economic costs of transportation and dewatering. It is noted that the high humidity, ash content and low calorific value of scum are the main reason for the lack of effective technologies for its utilization. The solution to the problem is the use of low-energy technologies through the direct use of osprey as a component of the soil mixture for biological reclamation of man-made landscapes. The article substantiates an environmentally safe and socially favourable option for using a soil substrate based on osprey. It is emphasised that the humidity and organic viscosity of the plant origin of osprey form the agrotechnical properties of soil substrates of prolonged action, which ensure optimal technological efficiency of phytomelioration of degraded lands. The reclaimed areas will reduce greenhouse gas emissions from the soil, prevent wind and water erosion, and ensure the environmental safety of natural and man-made ecosystems.