Wear Behaviour of Crankshaft Journals Filled by Submerged Arc Welding
In this study, wear behaviour of crankshaft journals filled by a submerged arc welding with different welding wires and powders is investigated. Hardness and microstructure variations in the submerged arc welding are examined. In addition, the amount of weight loss in abrasion samples of filling dry...
Збережено в:
| Дата: | 2014 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут металофізики ім. Г.В. Курдюмова НАН України
2014
|
| Назва видання: | Металлофизика и новейшие технологии |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/106894 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Wear Behaviour of Crankshaft Journals Filled by Submerged Arc Welding / A.A. Öztürk, B. Gülenç, A. Durgutlu, N. Kahraman // Металлофизика и новейшие технологии. — 2014. — Т. 36, № 3. — С. 317-327. — Бібліогр.: 19 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | In this study, wear behaviour of crankshaft journals filled by a submerged arc welding with different welding wires and powders is investigated. Hardness and microstructure variations in the submerged arc welding are examined. In addition, the amount of weight loss in abrasion samples of filling dry and lubrication ambience is measured under 40 N loads. It is observed that the amount of abrasion decreased with the increase of hardness at a certain point. Thin wire structure is provided for better abrasion resistance, and abrasion decreases with lubrication. |
|---|