Drawing with shear as an effective method of the control of the structure and the properties for low-carbon steel
Technology of drawing with shear has been developed for manufacturing of low-carbon steel wire without annealing. It has been established that a specific feature of the presented technology is a reduction of the structure anisotropy and an increase in the plasticity resource. This effect is associat...
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Донецький фізико-технічний інститут ім. О.О. Галкіна НАН України
2015
|
| Назва видання: | Физика и техника высоких давлений |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/107398 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Drawing with shear as an effective method of the control of the structure and the properties for low-carbon steel / E. Pashinskaya, A. Zavdoveev, V. Varyukhin, V. Tkachenko, A. Maksakova, I. Alekseenko // Физика и техника высоких давлений. — 2015. — Т. 25, № 3-4. — С. 47-59. — Бібліогр.: 23 назв. — англ. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | Technology of drawing with shear has been developed for manufacturing of low-carbon steel wire without annealing. It has been established that a specific feature of the presented technology is a reduction of the structure anisotropy and an increase in the plasticity resource. This effect is associated with shear that forces a change of the metal flow direction. |
|---|