Decontamination effects of the corona discharge with plane to bent needle configuration
The dependency of the inhibition zone size on the needle geometry and angle between needle and plane in plane to needle electrode configuration was studied. Needles bent at angles from 0° (straight one) to 90° were used to study both negative and positive corona discharge treatment of the surface co...
Збережено в:
| Дата: | 2012 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2012
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/109211 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Decontamination effects of the corona discharge with plane to bent needle configuration / K. Bujaček, V. Fantova, V. Kříha // Вопросы атомной науки и техники. — 2012. — № 6. — С. 187-189. — Бібліогр.: 4 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The dependency of the inhibition zone size on the needle geometry and angle between needle and plane in plane to needle electrode configuration was studied. Needles bent at angles from 0° (straight one) to 90° were used to study both negative and positive corona discharge treatment of the surface contaminated with Candida albicans yeasts.Inhibition zones shape and size changes were studied for positive and negative corona discharge. Ellipsoidal shape was characteristic for all treated samples in case of positive corona treatment, while the three-segment shape was observed for higher angles in case of negative corona discharge. |
|---|