Computer modeling of charge particle beam extraction and transport
The computer simulation of the extraction of high current charge particle beam from a plasma source and its transport has been used for investigation of the beam quality and its dependence from plasma parameters. The calculation has been made for different geometry extraction system as well as accel...
Збережено в:
| Дата: | 2007 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2007
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/110506 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Computer modeling of charge particle beam extraction and transport / I.V. Litovko, E.M. Oks // Вопросы атомной науки и техники. — 2007. — № 1. — С.161-163. — Бібліогр.: 5 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The computer simulation of the extraction of high current charge particle beam from a plasma source and its transport has been used for investigation of the beam quality and its dependence from plasma parameters. The calculation has been made for different geometry extraction system as well as acceleration gap for purpose system optimization in attempt to generate the steady beam and to study the behavior and influence of different factors on beam parameters. The results indicate that the geometry extraction system, aperture shape and its diameter play an important role in beam formation process. Simulation shows that acceleration voltage and emission current essential influent on beam quality, intensity and beam divergence. The simulations are in a good agreement with experimental results and can provide the basis for optimizing of plasma source construction and its parameters for beam generation. |
|---|