A conceptual design of a MeV-energy ion microprobe with an immersion probe-forming system
The authors propose a new design for a MeV-energy ion microprobe based on the immersion probe-forming system that employs the accelerating tube at an early stage of beam focusing. The final probing beam formation on the target is provided by a separated Russian quadruplet of magnetic quadrupole lens...
Збережено в:
| Дата: | 2003 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2003
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/111237 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | A conceptual design of a MeV-energy ion microprobe with an immersion probe-forming system / A.G. Ponomarev, I.G. Ignat’ev, D.V. Magilin, V.I. Miroshnichenko, V.E. Storizhko // Вопросы атомной науки и техники. — 2003. — № 4. — С. 305-308. — Бібліогр.: 14 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The authors propose a new design for a MeV-energy ion microprobe based on the immersion probe-forming system that employs the accelerating tube at an early stage of beam focusing. The final probing beam formation on the target is provided by a separated Russian quadruplet of magnetic quadrupole lenses. As follows from the calculations, the length of this setup along the beamline (from the ion source to the target) does not exceed 4 m, but the resolution may be higher than that of most operating facilities of conventional design. |
|---|