Project of 181 MHz cavity with higher order modes damping
The project of 181 MHz RF cavity with damped higher-order modes is presented. The cavity shape is a pill-box like. Higher-order modes damping is carried out using 6 waveguide loads, which are connected to one flat cavity wall by 6 rectangular waveguides. For accelerating mode they are cutoff waveg...
Збережено в:
| Дата: | 2008 |
|---|---|
| Автори: | , , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2008
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/111399 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Project of 181 MHz cavity with higher order modes damping / Y.A. Biryuchevsky, A.A. Bushuev, O.I. Deichuli, E.K. Kendjebulatov, N.V. Mityanina, V.M. Petrov, E.A. Rotov // Вопросы атомной науки и техники. — 2008. — № 3. — С. 116-118. — Бібліогр.: 8 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The project of 181 MHz RF cavity with damped higher-order modes is presented. The cavity shape is a pill-box
like. Higher-order modes damping is carried out using 6 waveguide loads, which are connected to one flat cavity
wall by 6 rectangular waveguides. For accelerating mode they are cutoff waveguides. For effective coupling with
higher-order modes waveguides are united in pairs. Three waveguide pairs are located azimuthally by 120 degrees.
The results of the cavity numerical calculations and of the RF measurements for a scaled model are given. |
|---|