Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability

A quantitative approach to the determination of the ratio between binary and ternary intermetallic phases in the Al—Mg(Cu)—Li alloys is developed on the basis of the balance equations of the chemical and phase compositions as well as the experimentally measured lattice parameter of the α-solid solut...

Повний опис

Збережено в:
Бібліографічні деталі
Видавець:Інститут металофізики ім. Г.В. Курдюмова НАН України
Дата:2015
Автори: Betsofen, S., Grushin, I., Knyazev, M., Dolgova, M.
Формат: Стаття
Мова:English
Опубліковано: Інститут металофізики ім. Г.В. Курдюмова НАН України 2015
Назва видання:Металлофизика и новейшие технологии
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/112444
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Цитувати:Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability / S. Betsofen, I. Grushin, M. Knyazev, M. Dolgova // Металлофизика и новейшие технологии. — 2015. — Т. 37, № 11. — С. 1549-1565. — Бібліогр.: 14 назв. — англ.

Репозиторії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id irk-123456789-112444
record_format dspace
spelling irk-123456789-1124442017-01-22T03:02:56Z Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability Betsofen, S. Grushin, I. Knyazev, M. Dolgova, M. Дефекты кристаллической решётки A quantitative approach to the determination of the ratio between binary and ternary intermetallic phases in the Al—Mg(Cu)—Li alloys is developed on the basis of the balance equations of the chemical and phase compositions as well as the experimentally measured lattice parameter of the α-solid solution. As shown, for the Al—Mg(Cu)—Li alloys, the ratio between the fractions of the δ′ (Al₃Li) and S₁ (T₁) phases is determined by the ratio between the molar fractions of Li and Mg (Cu). The equations for the calculation of the contents of the S₁ (Al₂MgLi), T₁ (Al₂CuLi) and δ′ (Al₃Li) phases in the 1420, 1424, 5090 alloys (Al—Mg—Li alloys) and in the 1440, 1460, 1461, 1441, 1469, 2090, 2094, 2095, 8090, Weldalite 049 alloys (Al—Cu—Li alloys) used in Russia and other countries are given. The possibilities of the method application for the study and prediction of the phase stability and anisotropy of the elastic and strength properties are considered. Розроблено кількісний підхід для визначення співвідношення бінарних і трикомпонентних інтерметалевих фаз у стопах Al—Mg(Cu)—Li, заснований на рівняннях рівноваги хемічних і фазових складів, а також експериментально виміряній сталій кристалічної ґратниці α-твердого розчину. Показано, що для стопів Al—Mg(Cu)—Li співвідношення між фракціями фаз δ′ (Al₃Li) і S₁ (T₁) визначаються співвідношенням між мольними частками Li і Mg (Cu). Наведено рівняння для розрахунку вмісту фаз S₁ (Al₂MgLi), T₁ (Al₂CuLi) і δ′ (Al₃Li) у стопах 1420, 1424, 5090 (стопи Al—Mg—Li) та у стопах 1440, 1460, 1461, 1441, 1469, 2090, 2094, 2095, 8090, Weldalite 049 (стопи Al—Cu—Li). Розглянуто можливості застосування цієї методи для вивчення та передбачення фазової стабільности й анізотропії пружніх і міцнісних властивостей. Разработан количественный подход для определения соотношения бинарных и трёхкомпонентных интерметаллических фаз в сплавах Al—Mg(Cu)—Li, основанный на уравнениях равновесия химических и фазовых составов, а также экспериментально измеренной постоянной кристаллической решётки α-твёрдого раствора. Показано, что для сплавов Al—Mg(Cu)—Li соотношение между фракциями фаз δ′ (Al₃Li) и S₁ (T₁) определяется соотношением между мольными долями Li и Mg (Cu). Приведены уравнения для расчёта содержания фаз S₁ (Al₂MgLi), T₁ (Al₂CuLi) и δ′ (Al₃Li) в сплавах 1420, 1424, 5090 (сплавы Al—Mg—Li) и в сплавах 1440, 1460, 1461, 1441, 1469, 2090, 2094, 2095, 8090, Weldalite 049 (сплавы Al—Cu—Li). Рассмотрены возможности применения данного метода для изучения и предсказания фазовой стабильности и анизотропии упругих и прочностных свойств. 2015 Article Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability / S. Betsofen, I. Grushin, M. Knyazev, M. Dolgova // Металлофизика и новейшие технологии. — 2015. — Т. 37, № 11. — С. 1549-1565. — Бібліогр.: 14 назв. — англ. 1024-1809 PACS: 61.05.cp, 61.66.Dk, 62.20.de, 64.70.kd, 64.75.Bc, 81.30.Bx http://dspace.nbuv.gov.ua/handle/123456789/112444 en Металлофизика и новейшие технологии Інститут металофізики ім. Г.В. Курдюмова НАН України
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
language English
topic Дефекты кристаллической решётки
Дефекты кристаллической решётки
spellingShingle Дефекты кристаллической решётки
Дефекты кристаллической решётки
Betsofen, S.
Grushin, I.
Knyazev, M.
Dolgova, M.
Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability
Металлофизика и новейшие технологии
description A quantitative approach to the determination of the ratio between binary and ternary intermetallic phases in the Al—Mg(Cu)—Li alloys is developed on the basis of the balance equations of the chemical and phase compositions as well as the experimentally measured lattice parameter of the α-solid solution. As shown, for the Al—Mg(Cu)—Li alloys, the ratio between the fractions of the δ′ (Al₃Li) and S₁ (T₁) phases is determined by the ratio between the molar fractions of Li and Mg (Cu). The equations for the calculation of the contents of the S₁ (Al₂MgLi), T₁ (Al₂CuLi) and δ′ (Al₃Li) phases in the 1420, 1424, 5090 alloys (Al—Mg—Li alloys) and in the 1440, 1460, 1461, 1441, 1469, 2090, 2094, 2095, 8090, Weldalite 049 alloys (Al—Cu—Li alloys) used in Russia and other countries are given. The possibilities of the method application for the study and prediction of the phase stability and anisotropy of the elastic and strength properties are considered.
format Article
author Betsofen, S.
Grushin, I.
Knyazev, M.
Dolgova, M.
author_facet Betsofen, S.
Grushin, I.
Knyazev, M.
Dolgova, M.
author_sort Betsofen, S.
title Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability
title_short Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability
title_full Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability
title_fullStr Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability
title_full_unstemmed Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability
title_sort quantitative methods for the study of al—li alloys: phase composition, anisotropy of properties, and phase stability
publisher Інститут металофізики ім. Г.В. Курдюмова НАН України
publishDate 2015
topic_facet Дефекты кристаллической решётки
url http://dspace.nbuv.gov.ua/handle/123456789/112444
citation_txt Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability / S. Betsofen, I. Grushin, M. Knyazev, M. Dolgova // Металлофизика и новейшие технологии. — 2015. — Т. 37, № 11. — С. 1549-1565. — Бібліогр.: 14 назв. — англ.
series Металлофизика и новейшие технологии
work_keys_str_mv AT betsofens quantitativemethodsforthestudyofallialloysphasecompositionanisotropyofpropertiesandphasestability
AT grushini quantitativemethodsforthestudyofallialloysphasecompositionanisotropyofpropertiesandphasestability
AT knyazevm quantitativemethodsforthestudyofallialloysphasecompositionanisotropyofpropertiesandphasestability
AT dolgovam quantitativemethodsforthestudyofallialloysphasecompositionanisotropyofpropertiesandphasestability
first_indexed 2024-03-30T09:22:15Z
last_indexed 2024-03-30T09:22:15Z
_version_ 1796149887375507456