Data assimilation and sensitivity of the Black Sea model to parameters
An adjoint based technique is applied to a Shallow Water Model in order to estimate influence of the model’s parameters on the solution. Among parameters the bottom topography, initial conditions, boundary conditions on rigid boundaries, viscosity coefficients and the amplitude of the wind stress...
Збережено в:
Дата: | 2011 |
---|---|
Автор: | |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Морський гідрофізичний інститут НАН України
2011
|
Назва видання: | Екологічна безпека прибережної та шельфової зон та комплексне використання ресурсів шельфу |
Теми: | |
Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/112664 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
Цитувати: | Data assimilation and sensitivity of the Black Sea model to parameters / E. Kazantsev // Екологічна безпека прибережної та шельфової зон та комплексне використання ресурсів шельфу: Зб. наук. пр. — Севастополь, 2011. — Вип. 25, т. 2. — С. 161-181. — Бібліогр.: 21 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineРезюме: | An adjoint based technique is applied to a Shallow Water Model in order to estimate
influence of the model’s parameters on the solution. Among parameters the bottom topography,
initial conditions, boundary conditions on rigid boundaries, viscosity coefficients
and the amplitude of the wind stress tension are considered. Their influence is analyzed
from different points of view.
Two configurations have been analyzed: an academic case of the model in a square
box and a more realistic case simulating Black Sea currents. It is shown in both experiments
that the boundary conditions near a rigid boundary influence the most the solution.
This fact points out the necessity to identify optimal boundary approximation during a
model development. |
---|