Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
High-speed cutting is widely employed in aerospace, automotive, die, and other industries. However, no comprehensive mechanism of highspeed cutting behavior was as yet comprehended completely. Models of thermal sources and fields of cutting temperature are proposed for analysis of thermal equi...
Збережено в:
| Дата: | 2014 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2014
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/112706 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods / H.P. An, Z.V. Rui, R.F. Wang, Z.M. Zhang // Проблемы прочности. — 2014. — № 2. — С. 164-171. — Бібліогр.: 11 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
irk-123456789-112706 |
|---|---|
| record_format |
dspace |
| spelling |
irk-123456789-1127062020-12-20T15:26:29Z Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods An, H.P. Rui, Z.V. Wang, R.F. Zhang, Z.M. Научно-технический раздел High-speed cutting is widely employed in aerospace, automotive, die, and other industries. However, no comprehensive mechanism of highspeed cutting behavior was as yet comprehended completely. Models of thermal sources and fields of cutting temperature are proposed for analysis of thermal equilibrium between heat generation and energy consumption at high-speed dry cutting. Mathematic models of cutting temperature for three cutting deformation areas are developed to analyze heat generation and release behavior in high-speed machining. The ratios of heat distribution among a chip, cutter and workpiece were found for different cutting speeds using the MATLAB software. Высокоскоростное резание широко используется в авиакосмической, автомобильной и других отраслях промышленности. Однако комплексный механизм процесса высокоскоростного резания еще недостаточно изучен. На основе анализа теплового равновесия между тепловыделением и потреблением энергии при высокоскоростной обработке без смазочно-охлаждающей жидкости предложены модели тепловых источников и полей температур резания. Для анализа влияния выделения и выхода тепла при обработке на высоких скоростях резания выведены математические модели температур резания для трех зон деформирования. Определены соотношения распределения тепла между стружкой, резаком и заготовкой, иллюстрирующие степень пропорциональности со скоростью с помощью пакета прикладных программ MATLAB. Високошвидкісне різання широко використовується в авіакосмічній, автомобільній та інших галузях промисловості. Однак комплексний механізм процесу високошвидкісного різання ще недостатньо вивчений. На основі аналізу теплової рівноваги між тепловиділенням і споживанням енергії при високошвидкісній обробці без мастильно-охолоджуючої рідини запропоновано моделі теплових джерел та полів температур різання. Для аналізу впливу виділення і виходу тепла при обробці на високих швидкостях різання виведено математичні моделі температур різання для трьох зон деформування. Визначено співвідношення розподілу тепла між стружкою, різаком і заготівкою, що ілюструють ступінь пропорційності зі швидкістю за допомогою пакета прикладних програм MATLAB. 2014 Article Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods / H.P. An, Z.V. Rui, R.F. Wang, Z.M. Zhang // Проблемы прочности. — 2014. — № 2. — С. 164-171. — Бібліогр.: 11 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/112706 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| language |
English |
| topic |
Научно-технический раздел Научно-технический раздел |
| spellingShingle |
Научно-технический раздел Научно-технический раздел An, H.P. Rui, Z.V. Wang, R.F. Zhang, Z.M. Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods Проблемы прочности |
| description |
High-speed cutting is widely employed in aerospace,
automotive, die, and other industries. However,
no comprehensive mechanism of highspeed
cutting behavior was as yet comprehended
completely. Models of thermal sources and fields
of cutting temperature are proposed for analysis
of thermal equilibrium between heat generation
and energy consumption at high-speed dry cutting.
Mathematic models of cutting temperature
for three cutting deformation areas are developed
to analyze heat generation and release behavior
in high-speed machining. The ratios of heat distribution
among a chip, cutter and workpiece were
found for different cutting speeds using the
MATLAB software. |
| format |
Article |
| author |
An, H.P. Rui, Z.V. Wang, R.F. Zhang, Z.M. |
| author_facet |
An, H.P. Rui, Z.V. Wang, R.F. Zhang, Z.M. |
| author_sort |
An, H.P. |
| title |
Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods |
| title_short |
Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods |
| title_full |
Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods |
| title_fullStr |
Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods |
| title_full_unstemmed |
Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods |
| title_sort |
research on cutting-temperature field and distribution of heat rates among a workpiece, cutter, and chip for high-speed cutting based on analytical and numerical methods |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| publishDate |
2014 |
| topic_facet |
Научно-технический раздел |
| url |
http://dspace.nbuv.gov.ua/handle/123456789/112706 |
| citation_txt |
Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods / H.P. An, Z.V. Rui, R.F. Wang, Z.M. Zhang // Проблемы прочности. — 2014. — № 2. — С. 164-171. — Бібліогр.: 11 назв. — англ. |
| series |
Проблемы прочности |
| work_keys_str_mv |
AT anhp researchoncuttingtemperaturefieldanddistributionofheatratesamongaworkpiececutterandchipforhighspeedcuttingbasedonanalyticalandnumericalmethods AT ruizv researchoncuttingtemperaturefieldanddistributionofheatratesamongaworkpiececutterandchipforhighspeedcuttingbasedonanalyticalandnumericalmethods AT wangrf researchoncuttingtemperaturefieldanddistributionofheatratesamongaworkpiececutterandchipforhighspeedcuttingbasedonanalyticalandnumericalmethods AT zhangzm researchoncuttingtemperaturefieldanddistributionofheatratesamongaworkpiececutterandchipforhighspeedcuttingbasedonanalyticalandnumericalmethods |
| first_indexed |
2023-10-18T20:23:22Z |
| last_indexed |
2023-10-18T20:23:22Z |
| _version_ |
1796149915053719552 |