Monitoring the flow rate of water in the supercritical convection loop
The Supercritical Water Convection Loop with an irradiation chamber is created in KIPT. The Loop is made from stainless steel. It measures 1.2 by 1.5 m. The plant makes possible to carry out simulation corrosion tests of potential structural materials for Generation IV reactors with the Supercriti...
Збережено в:
| Дата: | 2016 |
|---|---|
| Автори: | , , , , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2016
|
| Назва видання: | Вопросы атомной науки и техники |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/115372 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Monitoring the flow rate of water in the supercritical convection loop / A.S. Bakai, E.Z. Biller, A.M. Bovda, V.N. Boriskin, Yu.V. Gorenko, V.A. Momot, L.V. Onischenko, V.I. Solodovnikov, S.V. Shelepko // Вопросы атомной науки и техники. — 2016. — № 3. — С. 120-122. — Бібліогр.: 5 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The Supercritical Water Convection Loop with an irradiation chamber is created in KIPT. The Loop is made
from stainless steel. It measures 1.2 by 1.5 m. The plant makes possible to carry out simulation corrosion tests of
potential structural materials for Generation IV reactors with the Supercritical Water-Cooling (SCWR) under irradiation.
Specimens in water flow at 350…400°C, 23…25 MPa are irradiated by the 10 MeV/10 kW electron beam of
LUE-10 linear accelerator. The monitor with powerful permanent magnets in the turning components is being devised
for expeditious control of the flow water velocity. |
|---|