On application of heat-conductive plastics in LED technology
A comparative analysis of the characteristics of heat-conducting plastic was performed. The results of the thermal measurements of two of the same type 3W LED modules installed on heat sink with the same area of heat-dissipating surface made of aluminum and heat-conducting polymer have been pr...
Збережено в:
Видавець: | Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України |
---|---|
Дата: | 2013 |
Автори: | , , |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України
2013
|
Назва видання: | Semiconductor Physics Quantum Electronics & Optoelectronics |
Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/117692 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Цитувати: | On application of heat-conductive plastics in LED technology / Yu.V. Trofimov, S.I. Lishik, P.P. Pershukevich // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2013. — Т. 16, № 2. — С. 198-200. — Бібліогр.: 1 назв. — англ. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of Ukraineid |
irk-123456789-117692 |
---|---|
record_format |
dspace |
spelling |
irk-123456789-1176922017-05-27T03:03:32Z On application of heat-conductive plastics in LED technology Trofimov, Yu.V. Lishik, S.I. Pershukevich, P.P. A comparative analysis of the characteristics of heat-conducting plastic was performed. The results of the thermal measurements of two of the same type 3W LED modules installed on heat sink with the same area of heat-dissipating surface made of aluminum and heat-conducting polymer have been presented. It has been shown that the overheating of LED module mounted on the heat-conducting polymer heat sink is 2…3 °С higher than that on the aluminum heat sink (thermal conductivity is 20 times higher). The ranges of applicability of the heat-conducting plastics in LED technology have been determined. 2013 Article On application of heat-conductive plastics in LED technology / Yu.V. Trofimov, S.I. Lishik, P.P. Pershukevich // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2013. — Т. 16, № 2. — С. 198-200. — Бібліогр.: 1 назв. — англ. 1560-8034 PACS 44.10.+i, 85.60.Jb http://dspace.nbuv.gov.ua/handle/123456789/117692 en Semiconductor Physics Quantum Electronics & Optoelectronics Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України |
institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
collection |
DSpace DC |
language |
English |
description |
A comparative analysis of the characteristics of heat-conducting plastic was
performed. The results of the thermal measurements of two of the same type 3W LED
modules installed on heat sink with the same area of heat-dissipating surface made of
aluminum and heat-conducting polymer have been presented. It has been shown that the
overheating of LED module mounted on the heat-conducting polymer heat sink is
2…3 °С higher than that on the aluminum heat sink (thermal conductivity is 20 times
higher). The ranges of applicability of the heat-conducting plastics in LED technology
have been determined. |
format |
Article |
author |
Trofimov, Yu.V. Lishik, S.I. Pershukevich, P.P. |
spellingShingle |
Trofimov, Yu.V. Lishik, S.I. Pershukevich, P.P. On application of heat-conductive plastics in LED technology Semiconductor Physics Quantum Electronics & Optoelectronics |
author_facet |
Trofimov, Yu.V. Lishik, S.I. Pershukevich, P.P. |
author_sort |
Trofimov, Yu.V. |
title |
On application of heat-conductive plastics in LED technology |
title_short |
On application of heat-conductive plastics in LED technology |
title_full |
On application of heat-conductive plastics in LED technology |
title_fullStr |
On application of heat-conductive plastics in LED technology |
title_full_unstemmed |
On application of heat-conductive plastics in LED technology |
title_sort |
on application of heat-conductive plastics in led technology |
publisher |
Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України |
publishDate |
2013 |
url |
http://dspace.nbuv.gov.ua/handle/123456789/117692 |
citation_txt |
On application of heat-conductive plastics in LED technology / Yu.V. Trofimov, S.I. Lishik, P.P. Pershukevich // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2013. — Т. 16, № 2. — С. 198-200. — Бібліогр.: 1 назв. — англ. |
series |
Semiconductor Physics Quantum Electronics & Optoelectronics |
work_keys_str_mv |
AT trofimovyuv onapplicationofheatconductiveplasticsinledtechnology AT lishiksi onapplicationofheatconductiveplasticsinledtechnology AT pershukevichpp onapplicationofheatconductiveplasticsinledtechnology |
first_indexed |
2023-10-18T20:30:24Z |
last_indexed |
2023-10-18T20:30:24Z |
_version_ |
1796150381660602368 |