Reflection loss minimization for a ZnO/CdS/CuInSe₂ photovoltaic cell
A photovoltaic cell, based on copper and indium selenide (CuInSe₂) thin layers, with a good efficiency can be achieved by simple, easy to implement and low cost techniques. The high refractive index materials used as absorbers in photovoltaic cells cause high reflection losses (about 30%). Thin C...
Збережено в:
| Видавець: | Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України |
|---|---|
| Дата: | 2013 |
| Автори: | , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України
2013
|
| Назва видання: | Semiconductor Physics Quantum Electronics & Optoelectronics |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/117813 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Цитувати: | Reflection loss minimization for a ZnO/CdS/CuInSe₂ photovoltaic cell / Abdelhakim Mahdjoub, Lazhar Hadjeris // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2013. — Т. 16, № 4. — С. 379-381. — Бібліогр.: 8 назв. — англ. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | A photovoltaic cell, based on copper and indium selenide (CuInSe₂) thin
layers, with a good efficiency can be achieved by simple, easy to implement and low cost
techniques. The high refractive index materials used as absorbers in photovoltaic cells
cause high reflection losses (about 30%). Thin CdS and ZnO films that are, respectively,
the buffer layer and the window of the cell have lower indices and are naturally suited to
antireflective applications. Also, a suitable choice of the film thickness leads to
minimization of reflection losses, resulting in a significant improvement of the
photovoltaic efficiency. The aim of this work is to provide easy solutions that reduce
reflection losses to less than 4% while respecting technological constraints. |
|---|