Modeling of photo-conversion efficiency for hydrogenated amorphous Si p-i-n structures

An analytical formalism to optimize the photoconversion efficiency η of hydrogenated amorphous silicon-based (a-Si:H) solar cells has been developed. This model allows firstly the optimization of a p⁺ -i-n sandwich in terms of carrier mobilities, thickness of the layers, doping levels, and other...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2007
Автори: Sachenko, A.V., Sokolovskyi, I.O., Kazakevitch, A., Shkrebtii, A.I., Gaspari, F.
Формат: Стаття
Мова:English
Опубліковано: Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України 2007
Назва видання:Semiconductor Physics Quantum Electronics & Optoelectronics
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/118334
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Modeling of photo-conversion efficiency for hydrogenated amorphous Si p-i-n structures / A.V. Sachenko, I. O Sokolovskyi, A. Kazakevitch, A.I. Shkrebtii, F. Gaspari // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2007. — Т. 10, № 4. — С. 60-66. — Бібліогр.: 13 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Опис
Резюме:An analytical formalism to optimize the photoconversion efficiency η of hydrogenated amorphous silicon-based (a-Si:H) solar cells has been developed. This model allows firstly the optimization of a p⁺ -i-n sandwich in terms of carrier mobilities, thickness of the layers, doping levels, and others. Second, the geometry of grid fingers that conduct the photocurrent to the bus bars and ITO/SiO₂ layers has been optimized, and the effect of non-zero incidence angles of Sun’s light has been included as well. The optimization method has been applied to typical a-Si:H solar cells. The codes allow the optimization of amorphous Si based solar cells in a wide range of parameters and are available on the e-mail request.