Development and investigation of LC light shutters for a welding automatic mask
Elements of technology to produce liquid crystal (LC) light shutters for a welding automatic mask with the built-in transparent heater for operating LC layer were developed. Experimental samples of light shutters were created using the developed technology, and their parameters and characteristics w...
Збережено в:
| Дата: | 2004 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України
2004
|
| Назва видання: | Semiconductor Physics Quantum Electronics & Optoelectronics |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/119204 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Development and investigation of LC light shutters for a welding automatic mask / Yu. Kolomzarov, P. Oleksenko, V. Sorokin, P. Tytarenko, R. Zelinskyy // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2004. — Т. 7, № 4. — С. 384-388. — Бібліогр.: 12 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | Elements of technology to produce liquid crystal (LC) light shutters for a welding automatic mask with the built-in transparent heater for operating LC layer were developed. Experimental samples of light shutters were created using the developed technology, and their parameters and characteristics were investigated. Measuring the “switch-on” times of the created light shutters has shown that the transition from the transparent state to the opaque one within the temperature range from –20 up to +50 °C lasts less than 1.5 ms. This value meets the requirements of international standards. |
|---|