Получение в условиях высоких давлений и температур наноструктурных композитов и нструментального назначения
The present paper reports the results of sintering statically synthesized nanopowders in the presence of sintering aids. The observed peculiarities of the sample grain structure allow a conclusion that the in sintering of diamonds, the recrystallization with participation of the liquid phase takes...
Збережено в:
Видавець: | Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України |
---|---|
Дата: | 2006 |
Автори: | , , |
Формат: | Стаття |
Мова: | Russian |
Опубліковано: |
Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України
2006
|
Назва видання: | Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения |
Теми: | |
Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/134977 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Цитувати: | Получение в условиях высоких давлений и температур наноструктурных композитов и нструментального назначения / А.А. Шульженко, А.Н. Соколов, Г.С. Олейник // Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения: Сб. науч. тр. — К.: ІНМ ім. В.М. Бакуля НАН України, 2006. — Вип. 9. — С. 132-138. — Бібліогр.: 10 назв. — рос. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of UkraineРезюме: | The present paper reports the results of sintering statically synthesized nanopowders in the
presence of sintering aids. The observed peculiarities of the sample grain structure allow a conclusion that the in sintering of diamonds, the recrystallization with participation of the liquid phase
takes place. A combination of the mechanical preactivation of the initial reaction mixture by adding
the sintering aids allows one to essentially increase physico-mechanical characteristics of the high
pressure-high temperature sintered diamond nanocomposite. This is achieved first of all because of
the homogeneity of the microstructure of the sintered composite and because of the microcracking
is suppressed by sintering aids. |
---|