Corrosion resistance of prestressing steel wires

Cold drawing process is widely used for strengthening of wires made from pearlitic steels for reinforsed concrete structures. Then the steels undergo plastic deformation and the amount of defects rises. It could worsen their corrosion resistance. In this work the effect of cold drawing on the electr...

Повний опис

Збережено в:
Бібліографічні деталі
Видавець:Фізико-механічний інститут ім. Г.В. Карпенка НАН України
Дата:2014
Автори: Hredil, М.І., Toribio, J.
Формат: Стаття
Мова:Ukrainian
Опубліковано: Фізико-механічний інститут ім. Г.В. Карпенка НАН України 2014
Назва видання:Фізико-хімічна механіка матеріалів
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/135882
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Цитувати:Corrosion resistance of prestressing steel wires / M.I. Hredil, J. Toribio // Фізико-хімічна механіка матеріалів. — 2014. — Т. 50, № 5. — С. 39-43. — Бібліогр.: 12 назв. — укp.

Репозиторії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id irk-123456789-135882
record_format dspace
spelling irk-123456789-1358822018-06-16T03:08:24Z Corrosion resistance of prestressing steel wires Hredil, М.І. Toribio, J. Cold drawing process is widely used for strengthening of wires made from pearlitic steels for reinforsed concrete structures. Then the steels undergo plastic deformation and the amount of defects rises. It could worsen their corrosion resistance. In this work the effect of cold drawing on the electrochemical behaviour of a pearlitic steel in alkali and neutral environments is investigated. Under passivation conditions in the environment with рН 12.5 the changes in the steel properties are not fixed. The decrease in polarization resistance values and therefore corrosion acceleration as a result of the steel treatment is observed only in the vicinity of corrosion potential in 3% NaCl solution. Холодне волочіння широко застосовують для надання міцності пруткам перлітної сталі для залізобетонних виробів. При цьому сталь пластично деформується, зростає кількість дефектів, що може знизити її корозійну тривкість. Досліджено вплив холодного волочіння на електрохімічну поведінку перлітної сталі у лужному та нейтральному середовищах. За умов пасивації поверхні в середовищі з рН 12,5 зміну властивостей сталі не зафіксовано. Зниження поляризаційного опору, а отже, корозійної тривкості сталі внаслідок обробки, спостерігали лише в околі потенціалу корозії у розчині NaCl. Холодное волочение широко используют для придания прочности пруткам из перлитной стали для железобетонных изделий. При этом сталь пластически деформируется, возростает количество дефектов, что может снизить ее корозионную стойкость. Исследовали влияние холодного волочения на электрохимическое поведение перлитной стали в щелочной та нейтральной средах. В условиях пассивации поверхности в среде с рН 12,5 изменение свойств стали не обнаружено. Снижение поляризационного сопротивления, а значит, коррозионной стойкости стали в результате обработки, наблюдали только вблизи потенциала коррозии в растворе NaCl. 2014 Article Corrosion resistance of prestressing steel wires / M.I. Hredil, J. Toribio // Фізико-хімічна механіка матеріалів. — 2014. — Т. 50, № 5. — С. 39-43. — Бібліогр.: 12 назв. — укp. 0430-6252 http://dspace.nbuv.gov.ua/handle/123456789/135882 uk Фізико-хімічна механіка матеріалів Фізико-механічний інститут ім. Г.В. Карпенка НАН України
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
language Ukrainian
description Cold drawing process is widely used for strengthening of wires made from pearlitic steels for reinforsed concrete structures. Then the steels undergo plastic deformation and the amount of defects rises. It could worsen their corrosion resistance. In this work the effect of cold drawing on the electrochemical behaviour of a pearlitic steel in alkali and neutral environments is investigated. Under passivation conditions in the environment with рН 12.5 the changes in the steel properties are not fixed. The decrease in polarization resistance values and therefore corrosion acceleration as a result of the steel treatment is observed only in the vicinity of corrosion potential in 3% NaCl solution.
format Article
author Hredil, М.І.
Toribio, J.
spellingShingle Hredil, М.І.
Toribio, J.
Corrosion resistance of prestressing steel wires
Фізико-хімічна механіка матеріалів
author_facet Hredil, М.І.
Toribio, J.
author_sort Hredil, М.І.
title Corrosion resistance of prestressing steel wires
title_short Corrosion resistance of prestressing steel wires
title_full Corrosion resistance of prestressing steel wires
title_fullStr Corrosion resistance of prestressing steel wires
title_full_unstemmed Corrosion resistance of prestressing steel wires
title_sort corrosion resistance of prestressing steel wires
publisher Фізико-механічний інститут ім. Г.В. Карпенка НАН України
publishDate 2014
url http://dspace.nbuv.gov.ua/handle/123456789/135882
citation_txt Corrosion resistance of prestressing steel wires / M.I. Hredil, J. Toribio // Фізико-хімічна механіка матеріалів. — 2014. — Т. 50, № 5. — С. 39-43. — Бібліогр.: 12 назв. — укp.
series Фізико-хімічна механіка матеріалів
work_keys_str_mv AT hredilmí corrosionresistanceofprestressingsteelwires
AT toribioj corrosionresistanceofprestressingsteelwires
first_indexed 2023-10-18T21:12:45Z
last_indexed 2023-10-18T21:12:45Z
_version_ 1796152214692036608