The effect of phase state on damping capacity in Ti-5Al-5Mo-5V

The internal friction and Young's modulus behavior at function temperature in the range from 78 К to 300 К were studied in Ti-5Al-5Mo-5V alloy. The changing of quenching temperature regulated the phase composition. The internal friction peaks at 140-160 К were observed. The peak parameters wer...

Повний опис

Збережено в:
Бібліографічні деталі
Видавець:НТК «Інститут монокристалів» НАН України
Дата:2005
Автори: Ryumshyna, T., Nosolev, I., Konstantinova, T.
Формат: Стаття
Мова:English
Опубліковано: НТК «Інститут монокристалів» НАН України 2005
Назва видання:Functional Materials
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/137706
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Цитувати:The effect of phase state on damping capacity in Ti-5Al-5Mo-5V / T. Ryumshyna, I. Nosolev, T. Konstantinova // Functional Materials. — 2005. — Т. 12, № 2. — С. 382-385. — Бібліогр.: 11 назв. — англ.

Репозиторії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id irk-123456789-137706
record_format dspace
spelling irk-123456789-1377062018-06-18T03:09:04Z The effect of phase state on damping capacity in Ti-5Al-5Mo-5V Ryumshyna, T. Nosolev, I. Konstantinova, T. The internal friction and Young's modulus behavior at function temperature in the range from 78 К to 300 К were studied in Ti-5Al-5Mo-5V alloy. The changing of quenching temperature regulated the phase composition. The internal friction peaks at 140-160 К were observed. The peak parameters were found to be sensitive to phase composition. The nature of maxima was discussed. The significant decrease of Young's modulus was observed in monophase β alloy after quenching at temperature 900℃. Исследовано влияние фазового состава Ti-5Al-5Mo-5V сплава на температурные зависимости внутреннего трения и модуля Юнга в диапазоне 78-300 К. Фазовый состав сплава регулировался путем изменения температуры нагрева под закалку. Установлено существование максимума при 140-160 К, параметры которого зависят от фазового состава сплава. Проведен анализ процессов, отвечающих за формирование пика. Обнаружено значительное снижение модуля в однофазном β-сплаве после закалки от 900℃. Вивчено вплив фазового складу сплаву Ti-5Al-5Mo-5V на температурнi залежностi внутрiшнього тертя та модуля Юнга у дiапазонi 78-300 К. Фазовий склад сплаву регулювався змiною температури нагрiвання пiд загартовування. Установлено iснування максимуму внутрiшнього тертя при 140-160 К, параметри якого залежать вiд фазового складу сплаву. Проведено аналiз процесiв, якi вiдповiдають за формування пiку. Виявлено значне зниження модуля в однофазному β-сплавi пiсля гартування вiд 900℃. 2005 Article The effect of phase state on damping capacity in Ti-5Al-5Mo-5V / T. Ryumshyna, I. Nosolev, T. Konstantinova // Functional Materials. — 2005. — Т. 12, № 2. — С. 382-385. — Бібліогр.: 11 назв. — англ. 1027-5495 http://dspace.nbuv.gov.ua/handle/123456789/137706 en Functional Materials НТК «Інститут монокристалів» НАН України
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
language English
description The internal friction and Young's modulus behavior at function temperature in the range from 78 К to 300 К were studied in Ti-5Al-5Mo-5V alloy. The changing of quenching temperature regulated the phase composition. The internal friction peaks at 140-160 К were observed. The peak parameters were found to be sensitive to phase composition. The nature of maxima was discussed. The significant decrease of Young's modulus was observed in monophase β alloy after quenching at temperature 900℃.
format Article
author Ryumshyna, T.
Nosolev, I.
Konstantinova, T.
spellingShingle Ryumshyna, T.
Nosolev, I.
Konstantinova, T.
The effect of phase state on damping capacity in Ti-5Al-5Mo-5V
Functional Materials
author_facet Ryumshyna, T.
Nosolev, I.
Konstantinova, T.
author_sort Ryumshyna, T.
title The effect of phase state on damping capacity in Ti-5Al-5Mo-5V
title_short The effect of phase state on damping capacity in Ti-5Al-5Mo-5V
title_full The effect of phase state on damping capacity in Ti-5Al-5Mo-5V
title_fullStr The effect of phase state on damping capacity in Ti-5Al-5Mo-5V
title_full_unstemmed The effect of phase state on damping capacity in Ti-5Al-5Mo-5V
title_sort effect of phase state on damping capacity in ti-5al-5mo-5v
publisher НТК «Інститут монокристалів» НАН України
publishDate 2005
url http://dspace.nbuv.gov.ua/handle/123456789/137706
citation_txt The effect of phase state on damping capacity in Ti-5Al-5Mo-5V / T. Ryumshyna, I. Nosolev, T. Konstantinova // Functional Materials. — 2005. — Т. 12, № 2. — С. 382-385. — Бібліогр.: 11 назв. — англ.
series Functional Materials
work_keys_str_mv AT ryumshynat theeffectofphasestateondampingcapacityinti5al5mo5v
AT nosolevi theeffectofphasestateondampingcapacityinti5al5mo5v
AT konstantinovat theeffectofphasestateondampingcapacityinti5al5mo5v
AT ryumshynat effectofphasestateondampingcapacityinti5al5mo5v
AT nosolevi effectofphasestateondampingcapacityinti5al5mo5v
AT konstantinovat effectofphasestateondampingcapacityinti5al5mo5v
first_indexed 2023-10-18T21:16:28Z
last_indexed 2023-10-18T21:16:28Z
_version_ 1796152386123726848