Environmentally-assisted fatigue crack growth in prestressing steel wires
This paper presents the evolution of the surface crack front in prestressing reinforced concrete steel wires subjected to fatigue in air and to corrosion-fatigue in Ca(OH)₂+NaCl. To this end, a numerical modelling was made on the basis of a discretization of the crack front (with elliptical shape),...
Збережено в:
| Дата: | 2011 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Фізико-механічний інститут ім. Г.В. Карпенка НАН України
2011
|
| Назва видання: | Фізико-хімічна механіка матеріалів |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/138393 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Environmentally-assisted fatigue crack growth in prestressing steel wires / J. Toribio, J.C. Matos, В. González, J. Escuadra // Фізико-хімічна механіка матеріалів. — 2011. — Т. 47, № 6. — С. 45-51. — Бібліогр.: 19 назв. — англ. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | This paper presents the evolution of the surface crack front in prestressing reinforced concrete steel wires subjected to fatigue in air and to corrosion-fatigue in Ca(OH)₂+NaCl. To this end, a numerical modelling was made on the basis of a discretization of the crack front (with elliptical shape), considering that the crack advance at each point is perpendicular to such a front according to a Paris-Erdogan law, and using a threeparameter solution for stress intensity factor (SIF). Each analyzed case (a particular initial crack geometry) was characterized by the evolution of the semielliptical crack aspect ratio (relation between the semiaxes of the ellipse) with the relative crack depth and by the variation of the maximum dimensionless SIF at the crack front. |
|---|