Determination of the distorted surface layer thickness in machined optically transparent polymer articles
The functional performance of the optical polymer articles and the service life thereof are defined to a considerable extent by the surface layer state. When machined, the surface layer of polymer articles differs in its properties from the initial material. The combined force and heat action during...
Збережено в:
| Дата: | 2004 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
НТК «Інститут монокристалів» НАН України
2004
|
| Назва видання: | Functional Materials |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/139555 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Determination of the distorted surface layer thickness in machined optically transparent polymer articles / N.P. Khlapova, M.V. Litvinenko, A.A. Chernyshev // Functional Materials. — 2004. — Т. 11, № 4. — С. 815-819. — Бібліогр.: 7 назв. — англ. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The functional performance of the optical polymer articles and the service life thereof are defined to a considerable extent by the surface layer state. When machined, the surface layer of polymer articles differs in its properties from the initial material. The combined force and heat action during the cutting results in a complex final structure state of the surface layer. This fact requires investigations to determine the changed (distorted) layer depth after the machining and to study its influence on the functional properties of the optical polymer articles. |
|---|