Magnetic-pulse car body panels flattening. Theoretical aspects and practical results
The aim of the article is to provide theoretical and experimental studying of the «induction system with an attractive screen» practical effectiveness with the excited magnetic pulse attractive forces numerical estimation. Originality. For the first time, the theoretical analysis of the electrodynam...
Збережено в:
| Дата: | 2016 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут технічних проблем магнетизму НАН України
2016
|
| Назва видання: | Електротехніка і електромеханіка |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/147253 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Magnetic-pulse car body panels flattening. Theoretical aspects and practical results / Yu.V. Batygin, E.A. Chaplygin, O.S. Sabokar // Електротехніка і електромеханіка. — 2016. — № 4. — С. 54-57. — Бібліогр.: 12 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The aim of the article is to provide theoretical and experimental studying of the «induction system with an attractive screen» practical effectiveness with the excited magnetic pulse attractive forces numerical estimation. Originality. For the first time, the theoretical analysis of the electrodynamics process for the «inductor system with attractive screen» at the low frequent assumption
were conducted. Methodology of the analysis applied is based on the classic electrodynamics circuits theory. All of the resulted
carried out, were obtained as the Maxwell’s differential equation solutions and its behavior was analyzed analytically. Results.
The electrodynamics process was analyzed and the principle efficiency of the «induction system with an attractive screen» as an
effective tool for magnetic pulse forming of the thin sheet metals was substantiated. The axis distributions of the attractive forces
based on the relations been obtained were illuminated graphically. The results of experimental testing of the system in the engineering operation of the external non-contact dents removing on the car body panels samples were presented. Practical value.
According to the results of the calculation analyses the fundamental workability of the «inductor system with attractive shield» as
an effective magnetic pulse sheet metal part attraction tool was proved. It was shown that the not deep metal surface damages
could be worked up by magnetic pulses technologies with a high performance in a short time. |
|---|