Magnetic pulsed processing of metals for advanced technologies of modernity – a brief review
The aim of the article is dedicated to the brief review of the main achievements of the advanced technologies with usage of the energy of the pulsed magnetic fields. Originality. The new suggestions are represented. They are based on the results of development of the new scientific direction in are...
Збережено в:
| Дата: | 2016 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут технічних проблем магнетизму НАН України
2016
|
| Назва видання: | Електротехніка і електромеханіка |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/147262 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Magnetic pulsed processing of metals for advanced technologies of modernity – a brief review / Yu.V. Batygin, E.A. Chaplygin, O.S. Sabokar // Електротехніка і електромеханіка. — 2016. — № 5. — С. 35-39. — Бібліогр.: 10 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The aim of the article is dedicated to the brief review of the main achievements of the advanced technologies with usage of the
energy of the pulsed magnetic fields. Originality. The new suggestions are represented. They are based on the results of development of the new scientific direction in area of the magnetic pulsed processing of thin-walled sheet metals when a penetration of
the acting fields is quite significant. The known traditional approaches based on the skin-effect in electrodynamics and were successfully implemented. Methodology of the analysis consist of careful theoretical and practical experiments review and its future
development. Results of the research based on the existing experimental approbation were presented visually with the description
followed The known approaches to solution actual production problems based on the skin-effect in electrodynamics are described.
Practical value. The first of practical propositions is related to stamping of the drawing the printed circuit boards on the cooper
foil with thickness about ~50 mkm. This operation is realizing by the forces of magnetic pressure directly without any supplements introduction. The second consists in usage the magnetic pulsed attraction for external removing the dents in the car body.
This operation does not demand disassembling of elemental base and allows preserving the paint of coverings. Both of these
technologies could to minimize the working time, to decries the volume of the waste products and to make the manufacturing
existed much cheaper. |
|---|