Application of high voltage dividers for power quality indices measurement

• Дата: 2017
• Автори: Anokhin, Y.L., Brzhezytskyi, V.O., Haran, Ya.O., Masliuchenko, I.M., Protsenko, O.P., Trotsenko, Ye.O.
• Формат: Стаття
• Мова: English
• Опубліковано: Інститут технічних проблем магнетизму НАН України 2017
• Назва видання: Електротехніка і електромеханіка
• Теми: Техніка сильних електричних та магнітних полів. Кабельна техніка
• Онлайн доступ: http://dspace.nbuv.gov.ua/handle/123456789/147606
• Назва журналу: Digital Library of Periodicals of National Academy of Sciences of Ukraine
• Цитувати: Application of high voltage dividers for power quality indices measurement / Y.L. Anokhin, V.O. Brzhezytskyi, Ya.O. Haran, I.M. Masliuchenko, O.P. Protsenko, Ye.O. Trotsenko // Електротехніка і електромеханіка. — 2017. — № 6. — С. 53-59. — Бібліогр.: 17 назв. — англ.

Introduction. Determination of power quality indices in high-voltage power grids allows to find the reasons for the deterioration of the power quality. The relevant national and International Standards for power quality contain relevant norms of quality indices and requirements for their accuracy measurement. Problem. The most complicated part in the process of measuring the power quality indices at high voltage is the selection of the corresponding high-voltage scale voltage converters. Therefore, comparing the requirements of IEC 61000-4-30 to high voltage scale voltage converters is an important task. Goal. Analysis of the International Standard IEC 61000-4-30 requirements feasibility for measuring the indices of power quality in high-voltage electrical networks using different types of high-voltage scale voltage converters. Methodology. Comparison of the requirements of IEC 61000-4-30 Standard to high-voltage scale voltage converters, when measuring power quality indices, with the characteristics of high voltage electromagnetic transformers used in Ukraine, and with promising developments of high-voltage converters of other types. Results. It is shown in the study that in order to fulfill some of the requirements for class A of IEC 61000-4-30, the characteristics of electromagnetic voltage transformers should be determined in the substation conditions using mobile calibration high-voltage laboratories. To meet all the requirements for Class A IEC 61000-4-30, it is recommended to use broadband high-voltage dividers of resistive-capacitive type. Originality. In study it is shown firstly that all the requirements of the IEC 61000-4-30 Standard for high-voltage scale voltage converters can be performed on the basis of the use of broadband resistive-capacitive damped voltage dividers. Practical value. Expositions of specific types of resistive-capacitive high-voltage dividers are presented, their parameters are confirmed by the results of state metrological certification.