Analysis of electromagnetic processes in the system "cylindrical solenoid – massive conductor"
Purpose. Defining the key parameters of the inductor geometry, as a long multi-turn solenoid, that influence on the current amplitude induced excited in a massive conductor with a flat boundary surface. Methodology. Performing a mathematical analysis of the electrodynamic problem solution for an a...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут технічних проблем магнетизму НАН України
2018
|
| Назва видання: | Електротехніка і електромеханіка |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/147636 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Analysis of electromagnetic processes in the system "cylindrical solenoid – massive conductor" / Yu.V. Batygin, E.A. Chaplygin, O.S. Sabokar, V.A. Strelnikova // Електротехніка і електромеханіка. — 2018. — № 1. — С. 54-58. — Бібліогр.: 8 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | Purpose. Defining the key parameters of the inductor geometry, as a long multi-turn solenoid, that influence on the current
amplitude induced excited in a massive conductor with a flat boundary surface. Methodology. Performing a mathematical
analysis of the electrodynamic problem solution for an area with variable structure by integrating Maxwell's equation within the
given boundary and initial conditions and also physical assumptions simplifying the process of solving but not distorting the
result and carrying out an experiment that confirms not only the correctly construction considered but also the acceptability of
the chosen assumption the opacity applying of the metal blank for these operating fields frequencies. Results. Functional
dependencies of the current induced parameters on the metal surface of the heating object have been obtained, along which
numerical estimates of the electrodynamic process have been performed, and key parameters influencing the heating efficiency
have been determined. The correctness of the solutions obtained was confirmed experimentally. The final form of the solution
function of the physical-mathematical problem was shown to be acceptable for performing further engineering and research
calculations. Originality. The functional connection of the measured values of the induced surface current and the parameters of
the measuring system is determined, the experimental confirmation of which indicates the satisfactory calculation model of the
induction heating system and the entire solution as a whole. Practical value. Based on the calculations performed, working
samples of inductive systems for induction heating that meet the specified heating rate and area requirements can be constructed.
The obtained analytical expressions were transformed and simplified for their further using for engineering calculations with a
minimum error value |
|---|