Investigation of structure and properties of composite material Al₂O₃-SiC obtained by electroconsolidation process
The results of research of influence of structure and phase composition parameters on the microstructure, physico-mechanical and cutting properties of aluminum oxide-based composites obtained by electrosparking (electroconsolidation) are described. It has been established that formation of the compo...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
НТК «Інститут монокристалів» НАН України
2018
|
| Назва видання: | Functional Materials |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/154069 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Investigation of structure and properties of composite material Al₂O₃-SiC obtained by electroconsolidation process / R.V. Vovk, N.M. Prokopiv, V.A. Chishkala, M.V. Kislitsa // Functional Materials. — 2018. — Т. 25, № 1. — С. 43-47. — Бібліогр.: 11 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The results of research of influence of structure and phase composition parameters on the microstructure, physico-mechanical and cutting properties of aluminum oxide-based composites obtained by electrosparking (electroconsolidation) are described. It has been established that formation of the composite structure due to introduction of SiC nanopowders into the micropowder of aluminum oxide makes it possible to improve the physical and mechanical properties and wear resistance of Al₂O₃ ceramics. |
|---|