Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing
A combined method of slag refining and gas blowing technique were used for boron removal from metallurgical grade silicon and 75%wt Si-Sn alloy using the 45%CaO-45%SiO₂-10%CaCl₂ slag with the use of Ar gas and Ar-20%O₂ mixed gas. Increasing gas flow rate from 50 to 250 ml/min shows enhancement in B...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
НТК «Інститут монокристалів» НАН України
2018
|
| Назва видання: | Functional Materials |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/157193 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing / Rowaid Al-khazraji, Yaqiong Li, Lifeng Zhang // Functional Materials. — 2018. — Т. 25, № 3. — С. 625-631. — Бібліогр.: 21 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
irk-123456789-157193 |
|---|---|
| record_format |
dspace |
| spelling |
irk-123456789-1571932019-06-20T01:30:16Z Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing Rowaid Al-khazraji Yaqiong Li Lifeng Zhang Technology A combined method of slag refining and gas blowing technique were used for boron removal from metallurgical grade silicon and 75%wt Si-Sn alloy using the 45%CaO-45%SiO₂-10%CaCl₂ slag with the use of Ar gas and Ar-20%O₂ mixed gas. Increasing gas flow rate from 50 to 250 ml/min shows enhancement in B removal. At fixed conditions the Ar-20%O₂ mixed gas blowing shows a good removal efficiency of boron about 85% and 96% to MG and Si-Sn alloy respectively, compared with the single Ar gas blowing with 78.6% and 88% to MG and Si-Sn alloy respectively. Changes in slag composition representing by decreasing in all compounds especially CaCl₂ attached with increase in Al₂O₃. The B impurities after the treatment found with low intensity in Si matrix but with high intensity in slag phase and Sn phase. Boron removal controlled by mass transfer in slag phase with mass transfer coefficients of 3.38ċ10⁻⁴cm.s⁻¹ and 7.2ċ10⁻⁵cm.s⁻¹ in Si and Si-Sn alloy respectively. 2018 Article Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing / Rowaid Al-khazraji, Yaqiong Li, Lifeng Zhang // Functional Materials. — 2018. — Т. 25, № 3. — С. 625-631. — Бібліогр.: 21 назв. — англ. 1027-5495 DOI:https://doi.org/10.15407/fm25.03.625 http://dspace.nbuv.gov.ua/handle/123456789/157193 en Functional Materials НТК «Інститут монокристалів» НАН України |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| language |
English |
| topic |
Technology Technology |
| spellingShingle |
Technology Technology Rowaid Al-khazraji Yaqiong Li Lifeng Zhang Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing Functional Materials |
| description |
A combined method of slag refining and gas blowing technique were used for boron removal from metallurgical grade silicon and 75%wt Si-Sn alloy using the 45%CaO-45%SiO₂-10%CaCl₂ slag with the use of Ar gas and Ar-20%O₂ mixed gas. Increasing gas flow rate from 50 to 250 ml/min shows enhancement in B removal. At fixed conditions the Ar-20%O₂ mixed gas blowing shows a good removal efficiency of boron about 85% and 96% to MG and Si-Sn alloy respectively, compared with the single Ar gas blowing with 78.6% and 88% to MG and Si-Sn alloy respectively. Changes in slag composition representing by decreasing in all compounds especially CaCl₂ attached with increase in Al₂O₃. The B impurities after the treatment found with low intensity in Si matrix but with high intensity in slag phase and Sn phase. Boron removal controlled by mass transfer in slag phase with mass transfer coefficients of 3.38ċ10⁻⁴cm.s⁻¹ and 7.2ċ10⁻⁵cm.s⁻¹ in Si and Si-Sn alloy respectively. |
| format |
Article |
| author |
Rowaid Al-khazraji Yaqiong Li Lifeng Zhang |
| author_facet |
Rowaid Al-khazraji Yaqiong Li Lifeng Zhang |
| author_sort |
Rowaid Al-khazraji |
| title |
Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing |
| title_short |
Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing |
| title_full |
Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing |
| title_fullStr |
Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing |
| title_full_unstemmed |
Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing |
| title_sort |
boron removal from metallurgical grade silicon and si-sn alloy through slag refining with gas blowing |
| publisher |
НТК «Інститут монокристалів» НАН України |
| publishDate |
2018 |
| topic_facet |
Technology |
| url |
http://dspace.nbuv.gov.ua/handle/123456789/157193 |
| citation_txt |
Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing / Rowaid Al-khazraji, Yaqiong Li, Lifeng Zhang // Functional Materials. — 2018. — Т. 25, № 3. — С. 625-631. — Бібліогр.: 21 назв. — англ. |
| series |
Functional Materials |
| work_keys_str_mv |
AT rowaidalkhazraji boronremovalfrommetallurgicalgradesiliconandsisnalloythroughslagrefiningwithgasblowing AT yaqiongli boronremovalfrommetallurgicalgradesiliconandsisnalloythroughslagrefiningwithgasblowing AT lifengzhang boronremovalfrommetallurgicalgradesiliconandsisnalloythroughslagrefiningwithgasblowing |
| first_indexed |
2023-05-20T17:51:41Z |
| last_indexed |
2023-05-20T17:51:41Z |
| _version_ |
1796154257896898560 |