Creep of the Ti₃AlC₂ MAX-phase ceramics
The process of plastic deformation of multicomponent ceramics based on the MAX phase at room temperature and at higher (1000 °C) temperature has been studied by dilatometry and microindentation. Based on the experimentally obtained dependence of the strain rate of the material on the magnitude of th...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
НТК «Інститут монокристалів» НАН України
2019
|
| Назва видання: | Functional Materials |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/157423 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Creep of the Ti₃AlC₂ MAX-phase ceramics / Yu.I. Boyko, V.V. Bogdanov, E.S. Gevorkyan, R.V. Vovk, V.F. Korshak, V.A. Kolesnichenko // Functional Materials. — 2019. — Т. 26, № 1. — С. 83-87. — Бібліогр.: 15 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The process of plastic deformation of multicomponent ceramics based on the MAX phase at room temperature and at higher (1000 °C) temperature has been studied by dilatometry and microindentation. Based on the experimentally obtained dependence of the strain rate of the material on the magnitude of the applied load, conclusions were made about the mechanisms controlling the plastic deformation process in the samples under study. |
|---|