Elasto-Plastic Behavior of Aluminum Foams Subjected to Compression Loading
The non-linear behavior of uniform-size cellular foams made of aluminum is investigated when subjected to compressive loads while comparing numerical results obtained in the Finite Element Method software (FEM) ANSYS workbench and ANSYS Mechanical APDL (ANSYS Parametric Design Language). The numeric...
Збережено в:
| Дата: | 2017 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут механіки ім. С.П. Тимошенка НАН України
2017
|
| Назва видання: | Прикладная механика |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/158770 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Elasto-Plastic Behavior of Aluminum Foams Subjected to Compression Loading / H.M. Silva, C.D. Carvalho, N.R. Peixinho // Прикладная механика. — 2017. — Т. 53, № 3. — С. 137-144. — Бібліогр.: 9 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The non-linear behavior of uniform-size cellular foams made of aluminum is investigated when subjected to compressive loads while comparing numerical results obtained in the Finite Element Method software (FEM) ANSYS workbench and ANSYS Mechanical APDL (ANSYS Parametric Design Language). The numerical model is built on AUTODESK INVENTOR, being imported into ANSYS and solved by the Newton – Raphson iterative method. The most similar conditions were used in ANSYS mechanical and ANSYS workbench, as possible. The obtained numerical results and the differences between the two programs are presented and discussed. |
|---|