Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
The purpose of this paper is to design an analytical model for bending double support multilayer beams under a concentrated load, with the model based on the previously obtained elasticity theory solution for a multi-layer cantilever. The second part of the article contains examples of the implement...
Збережено в:
Дата: | 2019 |
---|---|
Автори: | , |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Інстиут проблем машинобудування ім. А.М. Підгорного НАН України
2019
|
Назва видання: | Проблеми машинобудування |
Теми: | |
Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/158814 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
Цитувати: | Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results / S.B. Kovalchuk, O.V. Goryk // Проблеми машинобудування. — 2019. — Т. 22, № 1. — С. 24-32. — Бібліогр.: 14 назв. — англ, рос. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineРезюме: | The purpose of this paper is to design an analytical model for bending double support multilayer beams under a concentrated load, with the model based on the previously obtained elasticity theory solution for a multi-layer cantilever. The second part of the article contains examples of the implementation of the model for bending double-support multi-layer beams under a concentrated load, with the model constructed in the first part of the article. Using this model, solutions to the problems of bending multi-layer beams with different types of fixation of their extreme cross-sections were obtained. |
---|