cBN based materials with TiN-Al binder phase: sintering, structure, properties
Cubic boron nitride material was produced via high pressure and high temperature sintering with titanium nitride and aluminum as binder phase. Microstructure, phase composition and physical-mechanical properties of the material were subject of current research. Formation of TiB₂ and AlN was establis...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України
2019
|
| Назва видання: | Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/159970 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | cBN based materials with TiN-Al binder phase: sintering, structure, properties / K.V. Slipchenko, V.Z. Turkevich, V.M. Bushlya, J.-E. Ståhl // Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения: Сб. науч. тр. — К.: ІНМ ім. В.М. Бакуля НАН України, 2019. — Вип. 22. — С. 254-260. — Бібліогр.: 14 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | Cubic boron nitride material was produced via high pressure and high temperature sintering with titanium nitride and aluminum as binder phase. Microstructure, phase composition and physical-mechanical properties of the material were subject of current research. Formation of TiB₂ and AlN was established in samples sintered at temperatures above 1750 °C. The highest values of microhardness were found in samples sintered at the temperature range of 1850 – 2000 °C. Fracture toughness of samples practically does not change during thermobaric sintering |
|---|