The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
The present study investigated the effect of the temperature, at which a new matrix material was produced via hot isostatic pressing (HIP) method by adding certain rate of Co and Ni elements into CuSn (85/15) bronze alloy, and Co and Ni elements wear resistance of the samples produced. One of major...
Збережено в:
| Видавець: | Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України |
|---|---|
| Дата: | 2019 |
| Автори: | , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України
2019
|
| Назва видання: | Сверхтвердые материалы |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/167308 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Цитувати: | The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method / Tülay Yıldız, Süleyman Aba // Надтверді матеріали. — 2019. — № 3 (239). — С. 21-35. — Бібліогр.: 25 назв. — англ. |
Репозиторії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The present study investigated the effect of the temperature, at which a new matrix material was produced via hot isostatic pressing (HIP) method by adding certain rate of Co and Ni elements into CuSn (85/15) bronze alloy, and Co and Ni elements wear resistance of the samples produced. One of major advantages of HIP method is that heat and pressure are applied simultaneously during the sintering process. Thus, all or almost all of the pores are eliminated during the manufacturing and a denser material is obtained. |
|---|