Miniature Meander- and Fractal-Shaped Microstrip Resonators

Numerical calculations of the characteristics of the meander- and fractal-shape (Hilbert curve) topologies of close-packed microstrip resonators are performed. The amplitude–frequency characteristics, resonance frequencies, quality factors, and geometric factors are calculated. The mechanisms of nei...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2018
Автори: Kalenyuk, A.A., Futimsky, S.I.
Формат: Стаття
Мова:English
Опубліковано: Інститут металофізики ім. Г.В. Курдюмова НАН України 2018
Назва видання:Металлофизика и новейшие технологии
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/167712
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Miniature Meander- and Fractal-Shaped Microstrip Resonators / A.A. Kalenyuk, S.I. Futimsky // Металлофизика и новейшие технологии. — 2018. — Т. 40, № 12. — С. 1573-1587. — Бібліогр.: 17 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Опис
Резюме:Numerical calculations of the characteristics of the meander- and fractal-shape (Hilbert curve) topologies of close-packed microstrip resonators are performed. The amplitude–frequency characteristics, resonance frequencies, quality factors, and geometric factors are calculated. The mechanisms of neighbouring resonator segments’ interaction are found. The latter strongly affects both the resonance frequency and the quality factor. Two high-temperature superconducting fractal-shaped microstrip resonators are fabricated using thin films of YBa₂Cu₃O₇₋δ (YBCO); the amplitude–frequency characteristics, the resonance frequencies, and the quality factor–frequency dependences are measured. Frequency dependence of a surface resistance of the YBCO film is found. The quality factors of the superconducting and copper resonators are compared, and the reasonability of the YBCO films’ usage as a material for thin-film resonators’ manufacturing is assessed.