Modelling of Thin Films Hardness Measured by a Spherical Indenter
In this theoretical contribution, we chose to use an indenter having a spherical geometrical form, which we used to model the surfaces mixture to separate the contributions of substrate and film in the composite covered material hardness. We have considered the coefficients α, β of the model as rati...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут металофізики ім. Г.В. Курдюмова НАН України
2018
|
| Назва видання: | Металлофизика и новейшие технологии |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/167719 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Modelling of Thin Films Hardness Measured by a Spherical Indenter / A. Boudilmi, K. Loucif // Металлофизика и новейшие технологии. — 2018. — Т. 40, № 12. — С. 1689-1697. — Бібліогр.: 22 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | In this theoretical contribution, we chose to use an indenter having a spherical geometrical form, which we used to model the surfaces mixture to separate the contributions of substrate and film in the composite covered material hardness. We have considered the coefficients α, β of the model as ratios of the projections of the imprints at the horizontal plans (disks surfaces). We prove that the film hardness of monolayer coating is dependent on the composite and substrate hardness, the geometrical form of the indenter, and the film thickness. |
|---|