Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars
In this paper, results of the nonlinear finite element (FE) analysis of twenty numbers of RC beams are presented and validated using the experimental results reported elsewhere. The nonlinear behavior of RC beams with external bars is quite complicated due to the involvement of heterogenic and crack...
Збережено в:
Дата: | 2014 |
---|---|
Автори: | , |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2014
|
Назва видання: | Проблемы прочности |
Теми: | |
Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173215 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
Цитувати: | Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars / G. Vasudevana, S. Kothandaramanb // Проблемы прочности. — 2014. — № 6. — С. 136-149. — Бібліогр.: 16 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraineid |
irk-123456789-173215 |
---|---|
record_format |
dspace |
spelling |
irk-123456789-1732152020-11-26T01:27:14Z Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars Vasudevana, G. Kothandaramanb, S. Научно-технический раздел In this paper, results of the nonlinear finite element (FE) analysis of twenty numbers of RC beams are presented and validated using the experimental results reported elsewhere. The nonlinear behavior of RC beams with external bars is quite complicated due to the involvement of heterogenic and cracking behavior of concrete. Also, modeling of external bars at the soffit level anchored at the ends is different from the conventional reinforcing bars due to lack of bonding at the soffit level. The finite element modeling is carried using SOLID65, SOLID45, LINK8, and COMBIN39 elements Одним из экономически эффективных и простых способов повышения прочности при изгибе является укрепление балки с помощью наружных стержней на уровне ее нижней поверхности. Обсуждаются моделирование методом конечных элементов и нелинейный анализ железобетонных балок с дополнительными арматурными стержнями, выполненные на базе программного комплекса ANSYS 12.0. Одним з економічно ефективних і простих способів підвищення міцності при згині є закріплення балки за допомогою зовнішніх стрижнів на рівні її нижньої поверхні. Обговорюються моделювання методом скінченних елементів і нелінійний аналіз залізобетонних балок із додатковими арматурними стрижнями, виконані на базі програмного комплексу ANSYS 12.0. Моделювання методом скінченних елементів залізобетонних балок проводилось на основі дискретного моделювання армування. 2014 Article Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars / G. Vasudevana, S. Kothandaramanb // Проблемы прочности. — 2014. — № 6. — С. 136-149. — Бібліогр.: 16 назв. — англ. 0556-171X http://dspace.nbuv.gov.ua/handle/123456789/173215 539.4 en Проблемы прочности Інститут проблем міцності ім. Г.С. Писаренко НАН України |
institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
collection |
DSpace DC |
language |
English |
topic |
Научно-технический раздел Научно-технический раздел |
spellingShingle |
Научно-технический раздел Научно-технический раздел Vasudevana, G. Kothandaramanb, S. Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars Проблемы прочности |
description |
In this paper, results of the nonlinear finite element (FE) analysis of twenty numbers of RC beams are presented and validated using the experimental results reported elsewhere. The nonlinear behavior of RC beams with external bars is quite complicated due to the involvement of heterogenic and cracking behavior of concrete. Also, modeling of external bars at the soffit level anchored at the ends is different from the conventional reinforcing bars due to lack of bonding at the soffit level. The finite element modeling is carried using SOLID65, SOLID45, LINK8, and COMBIN39 elements |
format |
Article |
author |
Vasudevana, G. Kothandaramanb, S. |
author_facet |
Vasudevana, G. Kothandaramanb, S. |
author_sort |
Vasudevana, G. |
title |
Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars |
title_short |
Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars |
title_full |
Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars |
title_fullStr |
Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars |
title_full_unstemmed |
Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars |
title_sort |
finite element analysis of bearing capacity of rc beams retrofitted with external bars |
publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
publishDate |
2014 |
topic_facet |
Научно-технический раздел |
url |
http://dspace.nbuv.gov.ua/handle/123456789/173215 |
citation_txt |
Finite Element Analysis of Bearing Capacity of RC Beams Retrofitted with External Bars / G. Vasudevana, S. Kothandaramanb // Проблемы прочности. — 2014. — № 6. — С. 136-149. — Бібліогр.: 16 назв. — англ. |
series |
Проблемы прочности |
work_keys_str_mv |
AT vasudevanag finiteelementanalysisofbearingcapacityofrcbeamsretrofittedwithexternalbars AT kothandaramanbs finiteelementanalysisofbearingcapacityofrcbeamsretrofittedwithexternalbars |
first_indexed |
2023-10-18T22:33:37Z |
last_indexed |
2023-10-18T22:33:37Z |
_version_ |
1796155836156870656 |