Studies of Static and Dynamic Characteristics of the EDM Machine Based on the ANSYS Workbench
The static and dynamic characteristics of the EDM machine as the main machining unit directlyinfluence the machining accuracy and stability. For a particular type of the EDM machine, the three-dimensional model was built with SolidWorks and the finite element method was employed with the ANSYS Workb...
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | , , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2015
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173269 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Studies of Static and Dynamic Characteristics of the EDM Machine Based on the ANSYS Workbench / J.H. Wang, G. Li, Z.F. Liu, Y.S. Zhao, Z.J. Cheng, J.Y. Liu, Y. Li // Проблемы прочности. — 2015. — № 1. — С. 101-108. — Бібліогр.: 8 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The static and dynamic characteristics of the EDM machine as the main machining unit directlyinfluence the machining accuracy and stability. For a particular type of the EDM machine, the three-dimensional model was built with SolidWorks and the finite element method was employed with the ANSYS Workbench to analyze the static and dynamic characteristics of the machine. The results show that the stiffness of the ram and vertical guide (Z-axis) in the Y and Z directions is the weak side of the machine. The analytical method is proved to be effective for the optimization of the machine design. |
|---|