Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
Polyetheretherketone (PEEK) is a new type of special engineering plastic that has broad market potentials due to its particular microstructure and mechanical properties. However, few data can be found in the literatures devoted to the mechanical properties and machinability of PEEK, especially in t...
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2015
|
| Назва видання: | Проблемы прочности |
| Теми: | |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/173285 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone / S.J. Ji, H.J. Yu, J. Zhao, F.S. Liang // Проблемы прочности. — 2015. — № 1. — С. 224-230. — Бібліогр.: 17 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | Polyetheretherketone (PEEK) is a new type of special engineering plastic that has broad market potentials due to its particular microstructure and mechanical properties. However, few data can be found in the literatures devoted to the mechanical properties and machinability of PEEK, especially in the superprecision field. For the first time, the microscopic mechanical properties and machinability of glassfiber-reinforced PEEK (GF/PEEK), which is one typical derivative of pure PEEK, are studied. The nanoindentation experiment was performed to analyze the microscopic mechanical properties of GF/PEEK. The machinability was studied by single-point diamond turning (SPDT) on the GF/PEEK surface, the roughness and form accuracy of the machined surface were obtained in the following test. Experimental results indicate that GF/PEEK has good microscopic mechanical properties and machinability. |
|---|